Young, R. A. and R. University of (1999). Preparation and characterisation of new organometallic polymers and encapsulated polymers.
|
Young, R. J. (1981). Introduction to polymers. London; New York, Chapman and Hall.
|
Young, R. J. (1983). Introduction to polymers. London, Chapman & Hall.
|
Young, R. J. and P. A. Lovell (1991). Introduction to polymers. London; New York, Chapman & Hall.
|
Young, R. J. and P. A. Lovell (2000). Introduction to polymers. Cheltenham, Stanley Thornes.
|
Young, R. J. and R. N. Haward (1997). The physics of glassy polymers. London, Chapman & Hall.
|
Younis, S. K. (2002). Synthesis of novel intrinsically coloured polymers, Leeds.
|
Youssef, Y. M. (2003). Influence of TIB2 particles on the solidification behaviour of aluminium alloys: [187] leaves.
|
Yu, J. S. (1992). A microstructural investigation of AuGeNi ohmic contacts to n-InGaAs and n-InP for optoelectronic integrated circuits.
|
Yu, K. (1993). Geometrical parameters of the nematic to isotropic transition in liquid crystalline polymers, University of Cambridge.
|
Yu, K.-O. (2002). Modeling for casting and solidification processing. New York, Marcel Dekker.
|
Yu, L. (1988). Solitons & polarons in conducting polymers. Singapore, World Scientific.
|
Yu, L. (1988). Solitons and polarons in conducting polymers. Singapore, World Scientific.
|
Yu, L. (1989). Syntheses and characterization of new polymers exhibiting large optical nonlinearities, University of Southern California.
|
Yu, T.-C. (1998). Statistical properties of uniform star polymers.
|
Yui, N. (2002). Supramolecular design for biological applications. Boca Raton, FL, CRC Press.
|
Yui, N., R. J. Mrsny, et al. (2004). Reflexive polymers and hydrogels: understanding and designing fast responsive polymeric systems. Boca Raton, FL, CRC Press.
|
Yui, N., R. J. Mrsny, et al. (2004). Reflexive polymers and hydrogels: understanding and designing fast-responsive polymeric systems. Boca Raton, FL; London, CRC Press.
|
Yurdakul, S. (1991). Electrophoresis of electrogenerated bubbles.
|
Yurenka, S., C. American Society for Testing and Materials. Committee d-30 on High Modulus Fibers and their, et al. (1969). Composite materials: testing and design: a symposium presented at a meeting of Committee D-30 on High Modulus Fibers and their Composites, American Society for Testing and Materials, [held in] New Orleans, La., 11-13 Feb. 1969. Philadelphia, American Society for Testing and Materials.
|
Yushchenko, K. A., S. Borisov Yu, et al. (1991). Thermal spraying of coatings. Composite materials deposited from the vapour phase in vacuum, Harwood.
|
Zachariades Anagnostis, E. and S. Porter Roger (1983). The strength and stiffness of polymers. New York, Dekker.
|
Zachariades Anagnostis, E. and S. Porter Roger (1988). High modulus polymers: approaches to design and development. New York, N.Y., Dekker.
|
Zachariades Anagnostis, E., Ed. (1983). Strength and stiffness of polymers. New York, Marcel Dekker.
|
Zachariades, A. E. and R. S. Porter (1983). The Strength and stiffness of polymers. New York, M. Dekker.
|
Zachariades, A. E. and R. S. Porter (1988). High modulus polymers: approaches to design and development. New York, M. Dekker.
|
Zachmann, H. G. and F. J. Baltá-Calleja (1993). Structure in polymers with special properties. Berlin; New York, Springer.
|
Zachmann, H. G., Ed. (1993). Structures in polymers with special properties, Springer-Verlag.
|
Zachmann, H. G., H. H. Kausch, et al. (1985). Characterization of polymers in the solid state II: synchrotron radiation, x-ray scattering and electron microscopy. Berlin; New York, Springer-Verlag.
|
Zafeiropoulos, N. E. (2001). Engineering and characterisation of the interface in flax/polypropylene composite materials.
|
Zafeiropoulos, N. E. and L. University of (2001). Engineering and characterisation of the interface in flax propylene composite materials. London, University of London.
|
Zagainov, G. I. and G. E. Lozino-Lozinski (1996). Composite materials in aerospace design. London, Chapman & Hall.
|
Zagar-Maricic, A. and E. Society of Plastics and Rubber, Eds. (1983). Application of polymers in surface protection of materials. Zagreb, Drustvo plasticara i gumaraca.
|
Zahavi, J. (1983). Solid particle erosion processes in thermoset and thermoplastic composite materials and polyurethane coatings, Air Force Wright Aeronautical Loboratories.
|
Zaikov Gennadii, E. (1998). Polymers in medicine. Commack, N. Y., Nova Science Publishers.
|
Zaikov Guennadii, E. and I. Slovak Academy of Sciences Polymer, Eds. (1992). Degradation, stabilization and combustion of polymers: 2nd International symposium on aging of polymers: Papers, Gordon and Breach.
|
Zaikov Guennadii, E., Ed. (1993). Polymeric materials with low flammability: 1st International symposium on low flammability polymers: Selected papers, Gordon and Breach.
|
Zaikov, G. E. (1999). Biomedical application of polymers. Commack, N.Y., Nova Science.
|
Zaikov, G. E., A. L. Iordanskii, et al. (1988). Diffusion of electrolytes in polymers. Utrecht, The Netherlands, VSP.
|
Zaikov, G. i. E. (1995). Degradation and stabilization of polymers: theory and practice. Commack, N.Y., Nova Science Publishers.
|
