Wilks Edward, S. (2000). Industrial polymers handbook: products, process, applications; Volume 3 - Synthetic Polymers (Continued) Biopolymers and their Derivatives. Weinheim; Cambridge, Wiley-VCH.
|
Wilks Edward, S. (2000). Industrial polymers handbook: products, process, applications; Volume 4 - Biopolymers and their Derivatives (Continued Indexes). Weinheim; Cambridge, Wiley-VCH.
|
Wilks, E. S. (2001). Industrial polymers handbook: products, processes, applications. Weinheim; Chichester, Wiley-VCH.
|
Williams David Robert, M. (1990). Hairpin dynamics in nematic liquid crystal polymers, University of Cambridge.
|
Williams Gwion, O. (1999). Conducting polymers for use in supercapacitors: an electrochemical and spectroelectrochemical investigation into low bandgap thiophene derivatives, University of Wales.Bangor.
|
Williams, G. B. (1984). Troubleshooting on microprocessor based systems. Oxford; New York, Pergamon Press.
|
Williams, J. G. (1973). Stress analysis of polymers. [London], Longman.
|
Williams, J. G. (1980). Studies in the thermal degradation of organic polymers, University of Exeter.
|
Williams, J. G. and A. Pavan (2000). Fracture of polymers, composites, and adhesives. Amsterdam; New York, Elsevier Science B. V.
|
Williams, J. G., A. Pavan, et al. (1995). Impact and dynamic fracture of polymers and composites: papers presented at the ESIS European Symposium on Impact and Dymnamic Fracture of Polymers and Composites, Porto Cervo, Sardinia, Italy 20-22 September 1993. London, Mechanical Engineering Publications.
|
Williams, J. G., A. Pavan, et al. (1995). Impact and dynamic fracture of polymers and composites: papers presented at the ESIS European Symposium on Impact and Dymnamic Fracture of Polymers and Composites, Porto Cervo, Sardinia, Italy. 1993. London, Mechanical Engineering Publications.
|
Williams, J. G., A. Pavan, et al., Eds. (1995). Impact and dynamic fracture of polymers and composites: European symposium: Papers. London, Mechanical Engineering.
|
Williams, K. M. (2002). High temperature uniaxial fatigue of oxide ceramics: 168 leaves.
|
Williams, M. P., E. Khoshdel, et al. (1999). Thermoresponsive polymers, their synthesis and properties. Manchester, UMIST.
|
Williams, R. and D. Society of Manufacturing Engineers. Marketing Services (1982). Machining hard materials. Dearborn [Mich.], Society of Manufacturing Engineers.
|
Williams, R. T. and C. University of Manchester. Department of (2001). Synthesis of novel polymers for applications in electroluminescent devices. Manchester, University of Manchester.
|
Williamson, M. D. (1993). Mud-gas separator response to well control procedure.
|
Willis, G. (1979). An investigation of the role of bacterial extra-cellular polymers in heavy metal removal in laboratoroy activated sludge units.
|
Wilshire, B. and D. R. J. Owen (1983). Engineering approaches to hightemperature design. Swansea, U.K., Pineridge Press.
|
Wilshire, B., D. European Office of Aerospace Research and, et al., Eds. (1981). Creep and fracture of engineering materials and structures: International conference: Papers. Swansea, Pineridge Press.
|
Wilson Brian, A. and Sampe, Eds. (1998). Materials - the star at center stage, SAMPE.
|
Wilson, A. D. and H. J. Prosser (1983). Developments in ionic polymers-- I. London; New York, Applied Science Publishers.
|
Wilson, A. D. and H. J. Prosser (1983). Developments in ionic polymers. London, Applied Science.
|
Wilson, A. D. and H. J. Prosser (1986). Developments in ionic polymers. London, Elsevier.
|
Wilson, G. J. (1958). Internal pressures of solid polymers. Manchester, University of Manchester.
|
Wilson, G. J. (1961). Viscous flow in liquid polymers. Manchester, University of Manchester.
|
Wilson, G. S. (1982). Physical and chemical studies of heat cured polymers used for crown and bridge construction: 749 leaves, 18 leaves of plates.
|
Wilson, J. E. (1974). Radiation chemistry of monomers, polymers, and plastics. New York, M. Dekker.
|
Wilson, R. and D. University of (1984). Surface and bulk characterisation of selected coals, bitumens and polymers as revealed by ESCA and other analytical techniques, University of Durham.
|
Wilson, S. A. (1999). Electric-field structuring of piezoelectric composite materials, Cranfield University.
|
Wilson, S. J. (1998). Surface characteristics of hydroxyapatite/bone cement composite materials. Birmingham, University of Birmingham.
|
Wimpey Offshore Engineers and Constructors, L. and E. Great Britain. Department of (1989). Static strength of large scale tubular joints: engineering assessment. London, HMSO.
|
Wimpey Offshore Engineers and Constructors, L. and E. Great Britain. Department of (1989). Static strength of large scale tubular joints: test programme and results. London, HMSO.
|
Winding Charles, C. and R. L. Hasche (1947). Plastics. Theory and practice. The technology of high polymers. New York & London, McGraw-Hill Book Co.
|
Winding, C. C. and R. L. Hasche (1947). Plastics: theory and practice; the technology of high polymers. New York, London, McGraw-Hill book company, inc.
|
Wineman, A. S. and K. R. Rajagopal (2000). Mechanical response of polymers: an introduction. Cambridge, [England]; New York, Cambridge University Press.
|
Wineman, A. S. and K. R. Rajagopal (2000). Mechanical response of polymers. Cambridge, Cambridge University Press.
|
Wingrave, J. A. (2001). Oxide surfaces. New York, Marcel Dekker.
|
Winter, C. S. and L. University of (1982). Conduction mechanisms in Langmuir-Blodgett monolayers of preformed polymers, University of Lancaster.
|
Wirjosumarto, H., Institute Teknologi Bandung. Pusat Teknologi Pembangunan., et al. (1982). Application of ferrocement and related composite materials in Indonesia: final report. Bandung, The Center.
|
