Stroeve, P., E. Franses, et al. (1987). Molecular engineering of ultrathin polymeric films: proceedings of the Workshop on the Molecular Engineering of Ultrathin Polymeric Films, Davis, California, USA, February 18-20, 1987. London; New York, Elsevier Applied Science: Sole distributor in the USA and Canada, Elsevier Science Pub. Co.
|
Stronge, W. J. and T. X. Yu (1993). Dynamic models for structural plasticity. London; New York, Springer-Verlag.
|
Stubb, H., Ed. (1985). Electronic structure of new materials: proceedings of the Advanced Summer School on the Electronic Structure of New Materials, Loviisa, Finland, 20-30 August 1984. Helsinki, Swedish Academy of Engineering Sciences in Finland.
|
Styles, C. M. (1993). Fracture and fatigue behaviour of a particulate reinforced aluminium based composite, Original typescript.
|
Stylianou, V. (1999). Finite volume modelling of RCP in brittle polymers.
|
Stylianou, V. P. (1998). Finite volume modelling of rapid crack propagation in brittle polymers.
|
Styrene Co-Polymers, L. T. D. (1953). SCOP. The news sheet of Styrene Co-Polymers Ltd. vol. 1. no. 2/3, etc. Sept. 1953, etc, Manchester.
|
Subrahmanyam, S. and U. Cranfield (2002). Design of molecularly imprinted polymers for sensors and solid phase extraction. Cranfield, Cranfield University.
|
Subramaniyan, J. (1989). Extrusion of 2024 aluminium alloy sections.
|
Sujirot, K. (1995). Silicate glass-ceramics containing fluoride for application in ceramic-matrix-composites.
|
Sulemanji, S. N., B. Polytechnic of the South, et al. (1985). The synthesis and study of a novel class of reactive alkoxypolysiloxane polymers. London, Polytechnic of the South Bank.
|
Summenscales, J. (1989). 607 further dissertations (to 3336) on fibre reinforced polymers. Plymouth, Polytechnic South West.
|
Summerscales, J. and C. Advanced Composites Manufacturing (1989). 607 further dissertations (to 3336) on fibre reinforced polymers. Plymouth, Advanced Composites Manufacturing Centre.
|
Summerscales, J. and C. Polytechnic South West. Advanced Composites Manufacturing (1989). 607 further dissertations (to 3336) on fibre reinforced polymers. Plymouth, Advanced Composites Manufacturing Centre.
|
Summerscales, J. and D. Short (1988). International dissertations on fibre reinforced polymers: author index to 2792. Lancaster, Pa., Technomic Pub.
|
Sumner, J. (1971). The pyrolytic degration of some high polymers.
|
Sun, C. T., A. Schapery Richard, et al. (2000). Time dependent and nonlinear effects in polymers and composites. W. Conshocken, Pa., ASTM.
|
Sun, D. (2003). Development of sintering and dissolution process for manufacturing Al foams. Liverpool, Thesis Ph.D.
|
Sunley, J., B. Bedding, et al. (1985). Timber in construction. London, B.T. Batsford/TRADA.
|
Suprenant Bruce, A. and D. American Society of Civil Engineers Materials Engineering (1990). Serviceability and durability of construction materials: 1st Materials engineering congress: Papers. New York, N.Y., American Society of Civil Engineers.
|
Suprenant, B. A. and American Society of Civil Engineers. Materials Engineering Division. (1990). Serviceability and durability of construction materials: proceedings of the First Materials Engineering Congress. New York, N.Y., American Society of Civil Engineers.
|
Supriaga, N. P. (1971). Sovremennye elektroradiomaterialy. Moskva, Izdatel'stvo "Znanie".
|
Suryanarayana, C. (2004). Mechanical alloying and milling. New York, Marcel Dekker.
|
Sutthisripok, W. (2002). Reproduction of Titanium Aluminides by hot extrusion reaction synthesis (HERS): 158 leaves.
|
Sutton, A. J. (1943). The Compressive Strength of Composite Insulating Materials, London.
|
Suwanprateeb, J. (1995). Creep behaviour of hydroxyapatite reinforced polythylene composities.
|
Svensson, M. and B. Chalmers tekniska högskola. Department of Chemistry and (2003). Synthesis and properties of conjugated polymers for photonic devices. Goteborg, Dept. of Chemistry and Bioscience, Chalmers University of Technology.
|
Svensson, M. and T. Chalmers tekniska högskola Department of Polymer (1997). Chiral liquid crystalline side-chain polymers: design, synthesis and properties. Goteborg, Department of Polymer Technology, Chalmers University of Technology.
|
Sviridenok, A. I., A. F. Klimovich, et al. (1999). Electrophysical phenomena in the tribology of polymers. Amsterdam, The Netherlands, Gordon and Breach Science Publishers.
|
Svrakic, N. M. and V. Privman (1989). Directed models of polymers, interfaces, and clusters: scaling and finite-size properties.
|
Swallowe, G. M. (1999). Mechanical properties and testing of polymers: an A-Z reference. Dordrecht; Bosotn, Kluwer Academic.
|
Swanson, S. R. (1997). Introduction to design and analysis with advanced composite materials. Upper Saddle River, N.J., Prentice Hall.
|
Swanton Stephen, W. (1989). The physico-chemical characterisation of zirconium polymers in aqueous solution, University of Bristol.
|
Swash, P. M. (1996). The hydrothermal precipitation of arsenical solids in the Ca-Fe-AsO4-SO4 system at elevated temperatures.
|
Swedish Natural Sciences Research, C., D. Swedish National Board for Technical, et al. (1987). Electronic processes in conducting polymers: Satellite confernce: 18th International conference on the physics of semiconducters: Papers, Elsevier Sequoia.
|
Swedish Pulp and Paper Research, I. (1991). Properties of ionic polymers natural and synthetic. Stockholm, STFI.
|
Sweetland Lee, A. (1997). Adsorption of organic micropollutants from water using Hypersol-Marconet"T"M polymers, Loughborough University of Technology.
|
Syahrial, E. (1997). Development of a novel compositional simulation approach to model recovery from volatile oil reservoirs.
|
Sydney, P., K. C. Persaud, et al. (1989). Investigation of the electrical properties of semiconducting polymers. Manchester, UMIST.
|
Symons Andrew, J. (1993). Synthesis and structural studies of side-chain liquid crystal polymers and elastomers, University of Reading.
|
