Stepto, S. (1999). The effect of fibre volume on the mechanical properties of woven composite materials, Queen's University of Belfast.
|
Stern, E. S. (1973). Fine chemicals for polymers. Oxford, Clarendon Press.
|
Stern, E. S. (1973). The chemist in industry. Oxford, Clarendon Press.
|
Stevens Malcolm, P. (1969). Characterization and analysis of polymers by gas chromatography. New York; London, Dekker.
|
Stevens, G. C. (1976). Polymerization, paramagnetism and photoelectron spectroscopy of diacetylene polymers.
|
Stevens, G. W. H. and F. C. Bluett (1969). A technique for studying high-velocity drawing in polymers. London, H.M. Stationery Off.
|
Stevens, K. A. (2002). The production and properties of titanium catalysed poly(ethylene terephthalate) polymers and fibres, Leeds.
|
Stevens, M. P. (1969). Characterization and analysis of polymers by gas chromat graphy, Dekker.
|
Stevens, M. P. (1969). Characterization and analysis of polymers by gas chromatography. New York, M. Dekker.
|
Stevens, P. J. (1980). Frictional wear of fibrous polymers and their assemblies, Leeds.
|
Stevenson, A. and I. Plastics and Rubber (1984). Rubber in offshore engineering: proceedings of a conference held in London from April 13 to April 15 1983. Bristol, Hilger.
|
Stevenson, R. W. W. (1993). An evaluation of gas permeable contact lens polymers and the effects on the corneal endothelium of long term PMMA contact lens wear.
|
Stevenson, W. T. K. (1980). Degradation of polymers based on styrene and butadiene/by William Thomas Kirkwood Stevenson.
|
Stevenson, W. T. K. and G. University of (1980). Degradation of polymers based on styrene and butadiene, University of Glasgow.
|
Steward Andrew, G. (2000). Application of controlled polymerisation techniques to the synthesis of polymers for the biomedical industry, University of Warwick.
|
Steward, N. I. (1989). Influence of particle size distribution on the sintering of ceramic powder compacts.
|
Stewart, D. (1993). A spin-label study of blends of immiscible polymers, University of Aberdeen.
|
Stile Martyn, A. (1987). An investigation into the synthesis of conjugated bipyridinium-containing polymers, University of Warwick.
|
Stille John, K. and M. G. Northolt (1991). Separation techniques thermodynamics liquid crystal polymers, Springer.
|
Stille John, K. and W. Campbell Tod (1972). Condensation monomers. New York; London, Wiley-Interscience.
|
Stille, J. K. and T. W. Campbell (1972). Condensation monomers. New York, Wiley-Interscience.
|
Stinchcomb Wayne, W., E. Ashbaugh Noel, et al., Eds. (1993). Composite materials: fatigue and fracture: 4th Symposium: Papers, The Society.
|
Stinchcomb, W. W. and E. Ashbaugh Noel (1993). Composite materials: fatigue and fracture, fourth volume.
|
Stinchcomb, W. W. and T. Conference on the Mechanics of Nondestructive (1980). Mechanics of nondestructive testing. New York; London, Plenum Press.
|
Stinchcomb, W. W., N. E. Ashbaugh, et al. (1993). Composite materials: fatigue and fracture. Philadelphia, PA, ASTM.
|
Stolbova, M. and S. University of (2004). Synthesis and characterisation of novel acrylic polymers. Glasgow, University of Strathclyde.
|
Stolka, M. (1978). Structure and properties of polymers. Berlin; New York, Springer-Verlag.
|
Stone Francis Gordon, A., G. Graham William Arthur, et al. (1962). Inorganic Polymers. Edited by F. G. A. Stone. W. A. G. Graham. New York, London, Academic Press.
|
Stone, F. G. A. and W. A. G. Graham (1962). Inorganic polymers. New York, Academic Press.
|
Stone, I. C., P. M. Mummery, et al., Eds. (2001). Microscopy of composite materials V, Royal Microscopy Society.
|
Stoumbos, A. D., J. N. Ashton, et al. (1991). Non destructive evaluation of fibre reinforced composite materials using ultrasonic techniques. Manchester, UMIST.
|
Stout, K., J. Davis, et al. (1990). Atlas of machined surfaces. London; New York, Chapman and Hall: Van Nostrand Reinhold.
|
Strålin, A. (1993). Improved adhesion between ethylene polymers and aluminium, Chalmers University of Technology.
|
Strang, A. and C. Institute of Materials Materials Engineering Division High Temperature Materials, Eds. (1995). Performance of bolting materials in high temperature plant applications: 2nd International conference on high temperature creep resistant materials: Papers, Institute of Materials.
|
Street, K. N. (1971). Creep behaviour of composite materials.
|
Strobel, M., C. S. Lyons, et al. (1994). Plasma surface modification of polymers: relevance to adhesion. Utrecht, VSP.
|
Strobl Gert, R. (1996). The physics of polymers: concepts for understanding their structures and behavior. Berlin; London, Springer Verlag.
|
Strobl, G. R. (1997). The physics of polymers: concepts for understanding their structures and behavior. Berlin; New York, Springer.
|
Strobl, G. R. (2003). Condensed matter physics: crystals, liquids, liquid crystals, and polymers. Berlin; New York, Springer.
|
Stroeve, P., E. Franses, et al. (1987). Molecular engineering of ultrathin polymeric films: proceedings of a Workshop on the Molecular Engineering of Ultrathin Polymeric Films, Davis, California, USA, February 18-20, 1987. London, Elsevier Applied Science.
|
