Srivatsan, T. S., E. J. Lavernia, et al. (1992). Processing, fabrication, and manufacturing of composite materials, 1992: presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992. New York, The Society.
|
Srivatsan, T. S., E. J. Lavernia, et al. (1992). Processing, fabrication, and manufacturing of composite materials, 1992: presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992. New York, The Society.
|
Srivatsan, T. S., K. Ramani, et al. (1994). Processing, design, and performance of composite materials, 1994: presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994. New York, N.Y., American Society of Mechanical Engineers.
|
Srivatsan, T. S., K. Ramani, et al., Eds. (1994). Processing, design, and performance of composite materials 1994: Symposium: International mechanical engineering congress: Papers, ASME.
|
Srivatsan, T. S., S. Chandrashekhar, et al. (1991). Processing and manufacturing of composite materials: presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Atlanta, Georgia, December 1-6, 1991. New York, N.Y., American Society of Mechanical Engineers.
|
Srivatsan, T. S., S. Chandrashekhar, et al. (1991). Processing and manufacturing of composite materials: presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Atlanta, Georgia, December 1-6, 1991. New York, N.Y., American Society of Mechanical Engineers.
|
Srivatsan, T. S., S. Chandrashekhar, et al., Eds. (1991). Processing and manufacturing of composite materials: Symposium: Winter annual meeting: Papers. ASME - publications - MD; vol 27. New York, AmericanSociety of Mechanical Engineers.
|
St epek, J. and H. Daoust (1983). Additives for plastics. New York, Springer-Verlag.
|
St. Pourcain Christopher, B. (1992). Synthesis of novel cyclic monomers for hydrogel polymers, University of Aston in Birmingham.
|
Stafström, S. (1985). Conducting polymers, a theoretical study of disorder effects in a model polymer and defect states in polyacetylene, Linkoping University.
|
Stafström, S. and M. International Conference on Science and Technology of Synthetic (1993). Proceedings of the International Conference on Science and Technology of Synthetic Metals (ICSM '92), Göteborg, Sweden, August 12-18, 1992. Lausanne, Elsevier Sequoia.
|
Stahl, G. A., D. N. Schulz, et al. (1988). Water-soluble polymers for petroleum recovery: National Meeting entitled "Polymers in enhanced oil recovery and the recovery of other natural resources": Papers. New York, Plenum Press.
|
Staley, B. G. (1997). Enhanced techniques for improved safety in mines.
|
Standing Committee of, A. (1988). Determination of acrylamide monomer in waters and polymers 1987. London, H.M.S.O.
|
Standing, D. J. (1995). The effects of manganese dispersoids upon the formability of aluminium-magnesium sheet alloys.
|
Stanek, C. R. (2003). Atomic scale disorder in fluorite and fluorite related oxides: 195 leaves.
|
Stanley, J. K. and M. American Society for (1963). Electrical and magnetic properties of metals. Metals Park, Ohio, American Society of Metals.
|
Stanley-Wood, N., R. W. Lines, et al. (1992). Particle size analysis: the proceedings of the 25th anniversary [7th particle size analysis] conference, 17th-19th September 1991, University of Technology, Loughborough. London, Society for Analytical Chemistry.
|
Star, S. L. and I. NetLibrary (1995). Ecologies of knowledge: work and politics in science and technology. Albany, State University of New York Press.
|
Stastna, J. and D. De Kee (1995). Transport properties in polymers. Lancaster, Pa., Technomic Pub. Co.
|
Staynes Barry, W. and S. The Concrete, Eds. (1987). The production performance & potential of polymers in concrete: 5th International congress on polymers in concrete: Papers, [Brighton Polytechnic].
|
Staynes Barry, W., C. International Congress on Polymer, et al. (1987). The production performance and potential of polymers in concrete. Brighton, Brighton Polytechnic.
|
Staynes, B. W., Icpic, et al. (1987). The production performance and potential of polymers in concrete: 5th International Congress on Polymers in Concrete, Brighton, England, 22-24 September 1987. Brighton, Brighton Polytechnic.
|
Stedman, J. C. (1992). Novel functionalised modifiers for bis-meleimide polymers, University of Surrey.
|
Steele, L. E., A. International Atomic Energy, et al. (1986). Radiation embrittlement of nuclear reactor pressure vessel steels: an international review (second volume), a conference. Philadelphia, PA, ASTM.
|
Stein Richard, S. and Amherst (1964). Rheo-optics of Polymers. Edited by Richard S. Stein. Held under the auspices of the Polymer Research Institute. August 24, 1963. [With illustrations.]. New York, Interscience Publishers.
|
Stein, C. and S. Joint Center for Materials (1976). Critical materials problems in energy production. New York [etc.]; London, Academic Press.
|
Stein, R. S. (1960). The optical and mechanical properties of high polymers. [Natick, Mass.].
|
Stein, R. S., I. Polymer Research, et al. (1964). Rheo-optics of polymers. New York, Interscience.
|
Stein, R. S., I. University of Massachusetts at Amherst. Polymer Research, et al. (1964). Rheo-optics of polymers. [Easton, Pa.], Interscience Publishers.
|
Stein, R. S., University of Massachusetts at Amherst. Polymer Research Institute., et al. (1964). Rheo-optics of polymers. [Easton, Pa.], Interscience Publishers.
|
Steinbüchel, A. and M. Hofrichter (2001). Biopolymers. Weinheim; Chichester, Wiley-VCH.
|
Steinbüchel, A. and S. European Materials Research, Eds. (1998). Biodegradable polymers and macromolecules, Elsevier.
|
Steinbüchel, A. and S. Matsumura (2002). Biopolymers. Weinheim; Cambridge, Wiley-VCH.
|
Steinbüchel, A. and S. Matsumura (2003). Biopolymers. Weinheim; Cambridge, Wiley-VCH.
|
Steinbüchel, A., D. Muster, et al. (1997). Biomaterials and biodegradable polymers and macromolecules: current research and industrial applications. Amsterdam; Oxford, Elsevier.
|
Stell David, T. (1992). Thermotropic polymers: relationships between chemistry and properties, University of Cambridge.
|
Stepek, J. and H. Daoust (1983). Additives for plastics. New York, Springer.
|
Stephanopoulos, G., A. A. Aristidou, et al. (1998). Metabolic engineering: principles and methodologies. San Diego; London, Academic Press.
|
Stephens, R. I., E. o. F. American Society for Testing and Materials. Committee, et al. (1985). Fatigue at low temperatures: a symposium sponsored by ASTM Committees E-9 on Fatigue and E-24 on Fracture Testing, Louisville, Ky., 10 May 1983. Philadelphia, Pa., American Society for Testing and Materials.
|
