Ottz Technic
Engineering Science Information Technology
Materials
Mechanical
Marine
Analytical Chemistry Electronics
Books about Materials Engineering
For the Materials Engineering Industry - Hundreds of Materials Engineering Books! Polymers, Composites, Ceramics, Alloys... Materials Engineering Books
Materials Engineering Books
Materials Engineering Books
Materials Engineering Books


Record 4761 to 4800
First Page Previous Page Next Page Last Page
Pritchard, G. and L. Rapra Technology (1995). Anti-corrosion polymers: PPEK, PEKK and other polyaryls, Rapra Technology Limited.

Privalko, V. P. and V. V. Novikov (1995). The science of heterogeneous polymers: structure and thermophysical properties. Chichester; New York, John Wiley.

Privman, V. and N. M. Švraki*c (1989). Directed models of polymers, interfaces, and clusters: scaling and finite-size properties. Berlin; New York, Springer-Verlag.

Proctor Andrew, D. (1992). Aryl propenoates as photoactive units in photocontrollable polymers, University of Reading.

Programme, L. C. R. and I. Great Britain. Central Office of (1988). LINK programmes collaborative research: bridging the gap between science and the market place. [London], LINK Collaborative Research Programme: 1portfolio.

Provatas, A. and O. Defence Science and Technology (2000). Energetic polymers and plasticisers for explosive formulations: a review of recent advances. Melbourne, Vic., DSTO.

Provder, T. and American Chemical Society. Division of Organic Coatings and Plastics Chemistry. (1984). Size exclusion chromatography: methodology and characterization of polymers and related materials. Washington, D.C., American Chemical Society.

Provder, T. and American Chemical Society. Meeting (1999). Chromatography of polymers: hyphenated and multidimensional techniques. Washington, D.C., American Chemical Society.

Provder, T., American Chemical Society. Division of Polymeric Materials: Science and Engineering., et al. (1993). Chromatography of polymers: characterization by SEC and FFF. Washington, DC, American Chemical Society.

Provder, T., E. American Chemical Society. Division of Polymeric Materials: Science and, et al. (1993). Chromatography of polymers: characterization by SEC and FFF: Symposium: 4th Chemical congress of North America: 202nd National meeting: Papers. Washington, DC, American Chemical Society.

Provder, T., H. G. Barth, et al. (1995). Chromatographic characterization of polymers: hyphenated and multidimensional techniques. Washington, DC, American Chemical Society.

Pryce, R. S. (2003). Bioactive glasses for delivery of nitric oxide for enhanced osteogenesis: [199] leaves.

Przydatek, J. (1998). The elevated temperature deformation of aluminium alloy 2650.

Przyluski, J. (1991). Conducting polymers: electrochemistry. Brookfield, Sci-Tech.

Przyluski, J. (1991). Conducting polymers-electrochemistry, Sci-Tech Pubs.

Przyluski, J. and S. Roth (1987). Electrochemistry of conducting polymers, proc. Autumn School held Kazimierz nad Wisla, September 21-27, 1986. Aedermannsdorf, Trans Tech Publications.

Przyluski, J. and S. Roth (1987). Electrochemistry of conducting polymers: proceedings of the international autumn school in Kazimierz, Poland. 1986.

Przyluski, J., S. Roth, et al. (1987). Electrochemistry of conducting polymers: proceedings of the International Autumn School in Kazimierz, Poland, September 21-27, 1986. Aedermannsdorf, Switzerland, Trans Tech Publications.

Przyluski, J., S. Roth, et al. (1991). Papers presented at the International School on Electrochemistry of Conductive Polymers (ECP '90), Kazimierz, Poland, September 10-16, 1990. Lausanne, Elsevier.

Przyluski, J., S. Roth, et al. (1992). Conducting polymers: transport phenomena. Zurich, Trans Tech.

Przyluski, J., S. Roth, et al., Eds. (1993). Conducting polymers: transport phenomena: 4th Autumn school on conducting polymers: Papers, Trans Tech.

Puajindanetr, S. (1992). Characterisation and sintering of precipitated hydroxyapatite.

Pukánszky, B. and F. Jones, Eds. (1998). Selected papers presented at the fifth international conference on interfacial phenomena in composite materials, Elsevier.

Pullen, W. J. (1975). The impact strength of polymers. Waltham Abbey, Kent, Explosives Research and Development Establishment.

Pullinger Mark, A. and S. University of (2002). Synthesis and characterisation of novel polymeric materials for high temperature composite applications.

Punkkinen, O. and t. Fysiikan (2004). Dynamics and scaling of polymers in a dilute solution: analytical treatment in two and higher dimensions. Helsinki, Helsinki Institute of Physics.

Punyodom, W. (2000). Cross-linking and chain extension studies of crystalline polymers, Leeds.

Purdue University. Center for Information and Numerical Data Analysis and Synthesis., J. F. Chaney, et al. (1979). Electronic properties research literature retrieval guide, 1972-1976: a comprehensive compilation of scientific and technical literature. New York, IFI/Plenum.

Purdue University. Thermophysical Properties Research Center., Y. S. Touloukian, et al. (1967). Thermophysical properties of high temperature solid materials. New York, Macmillan.

Purnomo, H. (1998). Inflow performance relationship for gas condensate and volatile oil wells.

Purslow, D. (1983). On the optical assessment of the void content in composite materials. Farnborough, Procurement Executive, Ministry of Defence.

Purslow, D. and E. Royal Aircraft (1983). On the optical assessment of the void content in composite materials. Farnborough, Royal Aircraft Establishment.

Purvis, J. (1975). The study of molecular orientation in polymers by polarized Raman spectroscopy, Leeds.

Pyrz, R. (1986). Mechanical characterisation of fibre composite materials: proceedings of the symposium held in Aalborg, 3-4 June 1986. Aalborg, Denmark, Aalborg University.

Pyrz, R. and International Union of Theoretical and Applied Mechanics. (1995). IUTAM Symposium on Microstructure-Property Interactions in Composite Materials: proceedings of the IUTAM Symposium held in Aalborg, Denmark, 22-25 August 1994. Dordrecht; Boston, Kluwer Academic Publishers.

Pyrz, R. and M. International Union of Theoretical and Applied, Eds. (1995). Microstructure-property interactions in composite materials: Symposium: Papers. Dordrecht; London, Kluwer Academic Publishers.

Pyrz, R. and U. Aalborg (1987). Mechanical characterisation of fibre composite materials: proceedings of the symposium held in Aalborg 3-4 June 1986. Aalborg, Denmark, Univ. of Aalborg.

Pyrz, R., I. S. o. M.-P. I. i. C. Materials, et al. (1995). IUTAM Symposium on Microstructure-Property Interactions in Composite Materials: proceedings of the IUTAM symposium held in Aalborg, Denmark. 1994. Dordrecht, Kluwer Academic.

Qian, R. (1963). Determination of molecular weights of high polymers. Jerusalem, Israel Program for Scientific Translations.

Qu, J., T. Kundu, et al., Eds. (2000). Nondestructive evaluation and characterization of engineering materials for reliability and durability predictions. ASME -publications- NDE; vol 18, ASME.


First Page Previous Page Next Page Last Page




Sitemap
Link | Link | Link | Link | Link | Link | Link | Link


powered by FreeFind


Last Modified: 12 October 2005
http://www.ottz.com