Payne, H. F. (1954). Organic coating technology. New York, Wiley.
|
Peard Paul, J. (1996). Lattice animal models of branched polymers in higher dimensions, University of London.
|
Pearson, R. G. (2000). The in vitro biological response to a simulated intra-articular environment associated with a cell-seeded ligament repair system.
|
Pechhold, W., M. Pietralla, et al. (1989). Relaxation in polymers. Darmstadt, Steinkopff.
|
Peck John, P. (2001). Molecular measurement through the use of fluorescent dyes: with a special emphasis on the chemical physics of solvatochromic dyes immobilised in polymers, University of North London.
|
Peebles Leighton, H. (1971). Molecular weight distributions in polymers. New York; London, Interscience.
|
Peebles, L. H. (1971). Molecular weight distributions in polymers. New York, Interscience Publishers.
|
Pegington, R. C. (2005). Design and preparation of new electroactive polymers for application in electronic devices.
|
Pelegri Assimina, A., A. M. Division, et al., Eds. (1999). Durability and damage tolerance of composite materials and structures -1999. ASME -publications- MD; vol 86, ASME.
|
Pelegri, A. A., American Society of Mechanical Engineers. Materials Division., et al. (1999). Durability and damage tolerance of composite materials and structures, 1999: presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee. New York, N.Y., American Society of Mechanical Engineers.
|
Pelillo, E. (1998). Scratch deformation of polymers.
|
Pelillo, E. (1998). Scratch deformations of polymers, University of London.
|
Pena-Ballesteros, D. Y., M. M. Stack, et al. (1998). Erosion-corrosion of composite based materials in laboratory simulated fluidized bed conditions. Manchester, UMIST.
|
Pennsylvania State University. Dept. of Engineering Mechanics., J. Marin, et al. (1958). Materials engineering design for high temperatures. Proceedings for a short course. [University Park.
|
Peppas, N. A. (1986). Hydrogels in medicine and pharmacy. Boca Raton, Fla., CRC Press.
|
Percec, V., D. A. Tirrell, et al. (1994). International Symposium on New Macromolecular Architectures and Supramolecular Polymers. Basel; Oxford, Huthig & Wepf.
|
Percec, V., J. B. Lando, et al. (1995). Plenary and invited lectures presented at the MACROAKRON '94: 35th IUPAC International Symposium on Macromolecules held in Akron, Ohio, USA, 11-15 July 1994. Zug; Oxford, Huthig & Wepf.
|
Percec, V., J. Lando, et al. (1995). Polymers materials for the 21st century. Zug, Huthig & Wepf.
|
Pereloma, E., K. Raviprasad, et al. (2001). Engineering Materials 2001.
|
Perepechko, I. I. (1975). Acoustic methods of investigating polymers. Moscow, Mir.
|
Perera, S. P. and B. University of (1987). Gas chromatography and surface chemistry of porous polymers. Uxbridge, University of Brunel.
|
Perez, J. (1998). Physics and mechanics of amorphous polymers. Rotterdam; Brookfield, VT, A.A. Balkema.
|
Periodical, P. (1960). Polymer. The chemistry, physics and technology of high polymers, etc, London.
|
Perkins, N. A., C. European Chemical Marketing Research Association International, et al. (1975). Proceedings of the ninth International Conference of the European Chemical Marketing Research Association.: tomorrow's petrochemicals: raw materials, monomers and polymers. London. 1975. [London], [European Association for Industrial Marketing Research].
|
Perry Kenneth, E. (1993). Calculation of energy release rates for delaminations in composite materials using phase shifting Moire interferometry, University of Strathclyde.
|
Perry, R. S. (1997). Chemical and microbiological characterisation and oxidation of neutral ferruginous discharges.
|
Peter Sherwood Associates. (1975). Styrene monomer & polymers: world outlook, 1974-1984: supply-demand outlook, market analysis, capacities, economic pressures, raw materials, price prospects, economics. New York, The Associates.
|
Peterlin, A. and American Chemical Society. (1971). Plastic deformation of polymers; selected papers. New York, M. Dekker.
|
Peterlin, A., P. American Chemical Society Symposium on Plastic Deformation of, et al. (1971). Plastic deformation of polymers: selected papers presented at the American Chemical Society Symposium on Plastic Deformation of Polymers, New York, New York, September 10 and 11, 1969. New York, M. Dekker.
|
Petropouleas, A., L. Warren, et al. (1997). Surface tracking variations on polymers. Manchester, UMIST.
|
Petropoulos, J. H., R. H. Peters, et al. (1959). Some observations on the diffusion of dyestuffs in textile polymers. (2 vols.). Manchester, UMIST.
|
Petroski, H. and C. British Broadcasting (1987). To engineer is human. Horizon. [London], BBC Television Distributors.
|
Pettit, T. (1981). Appreciation of materials and design. London, Edward Arnold.
|
Peuvrel-Disdier, E., P. Navard, et al., Eds. (1999). Rheology, rheo-physics and flow-induced structures of liquid crystalline polymers, surfactants and block copolymers, Polish Chemical Society.
|
Pfluger, P. (1983). The chemical and physical properties of pyrrole base conduct polymers: the oxidation of neutral pyrrole, IBM.
|
Pham Quang, T. and R. Petiaud (1980). Spectres RMN des polymères 1H-13C = NMR spectra of polymers. Paris, Editions SCM.
|
Pham, Q. T. (1984). Proton and carbon NMR spectra of polymers. Chichester; New York, Wiley.
|
Pham, Q. T. and Q. T. Pham (1991). Proton and carbon NMR spectra of polymers. London
|
Pham, Q. T. and Q. T. Pham (2003). Proton and carbon NMR spectra of polymers. Chichester, West Sussex, England; New York, Wiley.
|
Pham, Q. T. and R. Petiaud (1980). Proton and carbon NMR spectra of polymers, SCM/Wiley.
|
