Park, C. A. (1979). The sliding wear of polymers against smooth surfaces, Leeds.
|
Parkås, J. and S. Chalmers tekniska högskola. Department of Chemical Engineering and Enviromental (2003). 13C-enriched dehydrogenation polymers used for studying light-induced yellowing of lignocellulosic materials. Goteborg, Forest Products and Chemical Engineering, Chalmers University of Technology.
|
Parker Earl, R., D. Antolovich Stephen, et al. (1986). Mechanical properties and phase transformations in engineering materials: Symposium on structure/property relationships: Papers. Warrendale, PA, The Metallurgical Society.
|
Parker, J. D. and E. University of Wales Department of Materials, Eds. (2001). Creep and fracture of engineering materials and structures, Institute of Materials.
|
Parker, S. (2005). Chemicals & change. Langhorne, PA, Chelsea House Publishers.
|
Parker, S. D. (1999). Monte Carlo modelling of Case I and Case II solvent diffusion in polymers, University of Surrey.
|
Parkinson, R. W. (1973). The wear of crystalline polymers, Leeds.
|
Parnell, W. J. and J. D. P. Abrahams (2004). Homogenization techniques for wave propagation in composite materials. Manchester, University of Manchester.
|
Parrish, G. and G. S. Harper (1985). Production gas carburising. Oxford; New York, Pergamon Press.
|
Parsons, K. P. (1986). Conducting polymers for modified electrodes: 248 leaves.
|
Parsons, N. S. (2001). Production and Characterisation of reinforced hydroxyapatite for bone replacement.
|
Partington, E. C. (1988). Liquid phase routes to the formation of alumina-metal composites.
|
Pascault, J.-P. (2002). Thermosetting polymers. New York, Marcel Dekker.
|
Pasch, H. and B. Trathnigg (1999). HPLC of polymers. Berlin; New York, Springer.
|
Pasch, H. and W. Schrepp (2003). MALDI-TOF mass spectrometry of synthetic polymers. Berlin; New York, Springer.
|
Pasch, H., R. D. Sanderson, et al. (2005). Polymers in novel applications: Stellenbosch, South Africa, April 5-8, 2004. Weinheim, Wiley-VCH.
|
Pascoe, K. J. (1973). Properties of materials for electrical engineers. London; New York, Wiley.
|
Pashley, D. W. (2001). Imperial College inaugural lectures in materials science and materials engineering. London, ICP.
|
Patel, D. (1989). Physical texture of synthetic crystalline polymers, University of Reading.
|
Patel, R. and L. D. o. P. King's College (2004). Characterising the interaction of polymers with low molecular weight carbohydrates in freeze dried formulations.
|
Patel, S. B. (1994). Quantification of oxygen in silicon using secondary ion mass spectrometry.
|
Paterson, W. S., M. J. Dill, et al. (1988). Fatigue strength of reinforced concrete in seawater: results from Phase II. London, H.M.S.O.
|
Patfoort, G. A. (1974). Polymers: an introduction to their physical, mechanical and rheological behaviour. Gent, Story-Scientia.
|
Pathak, K. (1996). Modelling and prediction of environmental noise levels near mechanised surface mines and quarries.
|
Patil, A. O., D. N. Schulz, et al. (1998). Functional polymers: modern synthetic methods and novel structures. Washington, DC, American Chemical Society.
|
Patsis Angelos, V. and P. International Conference on Advances in the Stabilization and Controlled Degradation of (1989). International Conference on Advances in the Stabilization and Controlled Degradation of Polymers presented in Lucerne, Switzerland. 1985 &. 1986. Lancaster, Pa., Technomic Publishing.
|
Patsis Angelos, V., Ed. (1989). Advances in the stabilization and controlled degradation of polymers: 9th International conference: Papers. Basel, Technomic Publishing Co.
|
Patsis Angelos, V., Ed. (1989). Advances in the stabilization and controlled degradation of polymers: International conference: Papers, Technomic.
|
Patsis, A. V. and P. International Conference on Advances in the Stabilization and Degradation of (1995). Papers presented at the "Sixteenth International Conference on Advances in the Stabilization and Degradation of Polymers" in Luzern (Switzerland), June 14-17, 1994. Zug; Oxford, Huthig & Wepf.
|
Patsis, A. V., D. A. Seanor, et al. (1976). Photoconductivity in polymers: an interdisciplinary approach. Westport, Conn., Technomic Pub. Co.
|
Patsis, A. V., Ed. (1994). Advances in the stabilization and degradation of polymers: 15th Annual international conference: Papers, Huthig and Wepf.
|
Patsis, A. V., Ed. (1995). Advances in the stabilization and degradation of polymers: 16th Annual international conference: Papers, Huthig and Wepf.
|
Patsis, A. V., Ed. (1997). Papers presented at the eighteenth annual international conference on advances in the stabilization and degradation of polymers, Huthig & Wepf.
|
Patterson, A. (2004). Synthesis and electrochemical characterisation of polypyrrole and novel n-substituted polypyrrole conducting polymers. Dublin, Trinity College.
|
Paturoev, V. V., R. L. Serykh, et al., Eds. (1992). Polymers in concrete: 7th International congress: Papers. Moscow, Betecom.
|
Paulsen Berit, S. and E. Phytochemical Society of (2000). Bioactive carbohydrate polymers. Dordrecht, Kluwer Academic.
|
Paulsen, B. S. (2000). Bioactive carbohydrate polymers. Dordrecht; Boston, Kluwer Academic Publishers.
|
Pavlinec, J., I. Slovak Academy of Sciences Polymer, et al., Eds. (1994). Modified polymers: 9th International Bratislava conference entitled "modification of thermoplastic polymers": Selected papers, Marcel Dekker.
|
Payne Peter, B. (1992). The synthesis and properties of 1,2- and 1,3-diols and their polymers for complexation of borate, Brunel University.
|
Payne, A. R., A. B. Davey, et al. (1966). The physical properties of polymers, Durham.
|
