Lowrie, F. L. (1996). Mechanical properties of a solid oxide fuel cell electrolyte.
|
Lu, J. (1991). Synthesis and degradation of methylene diester polymers, Leeds.
|
Lu, W. K. and E. McMaster University Department of Materials Science and, Eds. (1993). Pretreatment and reclamation of dusts, sludges and scales in steel plants: 21st Symposium on iron and steelmaking: Papers and transcripts. Hamilton, Department of Materials Science and Engineering, McMaster University.
|
Lu, W. K. and e. McMaster University Department of Materials Science and, Eds. (1995). Improved productivity of blast furnace operations, McMaster University.
|
Lu, W.-K. and E. McMaster University Department of Materials Science and, Eds. (1991). Raceway control for optimum blast furnace performance: 19th McMaster symposium on iron and steelmaking: Papers and discussions, McMaster University.
|
Lu, Z. (1998). Synthesis and physical properties of discotic liquid crystalline polymers, Leeds.
|
Lubin, G. and E. Society of Plastics (1982). Handbook of composites. New York; London, Van Nostrand Reinhold.
|
Luise, R. R. (1997). Applications of high temperature polymers. Boca Raton, CRC Press.
|
Luke David, G. (1997). Broadband optical fibre interferometry for strain measurement in composite materials, Heriot-Watt University.
|
Lumber, D. (1997). Fluorescence studies of the dynamics of water soluble polymers in aqueous solutions and dispersions, University of Lancaster.
|
Lundström, I., B. Rånby, et al. (1993). Conjugated polymers and related materials: the interconnection of chemical and electronic structure: proceedings of the eighty-first Nobel Symposium [Luleå, Sweden, 1991]. Oxford, OUP.
|
Luyen Dang, v., O. Vogl, et al., Eds. (1996). Selected papers presented at the first international polymer symposium on polymers from natural sources, Marcel Dekker.
|
Lynch, T. and E. Society for the Advancement of Material and Process, Eds. (1987). The nation's future materials needs: 19th International technical conference: Papers. Covin, California, SAMPE.
|
Ma James, J.-A. (1995). Novel hydrogel polymers, University of Aston in Birmingham.
|
Ma, C. C., G. J. Howard, et al. (1976). Adsorption of acrylic polymers on titania pigments and stability of pigment dispersions. Manchester, UMIST.
|
Mac Knight William, J., V. Tobolsky Arthur, et al. (1965). Polymeric sulfur and related polymers. New York, Interscience Publishers.
|
MacCallum, J. R. (1974). The degradation reactions of polymers: a series of papers on this topic, by James Richard MacCallum.
|
Maccarini, M. (2003). Surface and interface properties of industrially relevant polymers.
|
Maccarini, M. and S. University of (2002). Surface and interface properties of industrially relevant polymers.
|
MacDonald Scott, A., E. Reichmanis, et al. (1989). Polymers in microlithography: materials and processes: Symposium: 197th National meeting: Papers. Washington, D.C., American Chemical Society.
|
MacGregor, E. A. and C. T. Greenwood (1980). Polymers in nature. Chichester [Eng.]; New York, J. Wiley.
|
Mackinnon, K. U. (1998). Effect of heat and chemical treatment of the structure of glass for glass ionomer cements.
|
Mackintosh, J. G. (1996). The electropolymerisation and characterisation of novel conducting polymers.
|
Macromolecules, I. I. S. o. (1979). Current topics in synthesis and structure of polymers: presented at IUPAC 26th International Symposium, Mainz. Basel; New York, Huthig & Wepf.
|
Madden, A. (1994). Phase behaviour of side-chain liquid-crystalline polymers, Original typescript.
|
Madorsky Samuel, L. (1964). Thermal Degradation of Organic Polymers. New York, Interscience Publishers.
|
Madorsky, S. L. (1964). Thermal degradation of organic polymers. New York, Interscience Publishers.
|
Madorsky, S. L. (1975). Thermal degradation of organic polymers. Huntington, N.Y., R. E. Krieger Pub. Co.
|
Maechtle, W. (2006). Analytical ultracentrifugation of polymers and nanoparticles. New York, NY, Springer.
|
Maekawa, Z., E. Nakata, et al., Eds. (1995). Challenging to future advanced materials aiming for intelligence and harmonization. Yokohama, Japan Chapter of the Society for the Advancement of Material and Process Engineering.
|
Maekawa, Z., T. Fukuda, et al. (1994). Advances in fiber composite materials. Amsterdam; London, Elsevier.
|
Magezi, D. S. (1980). Charge separation associated with contact charging between polymers, Original typescript.
|
Magyar Tudományos Akadémia. and International Union of Pure and Applied Chemistry. (1969). Kinetics and mechanism of polyreactions; preprints of papers to be presented at the symposium, 25th-30th August 1969. Budapest, Akadémiai Kiadó.
|
Maher, J. W. (1984). A study of the thermal effects in the necking of polymers using an infrared camera. Birmingham, University of Birmingham.
|
Mahmood, T. (1993). Controlled degradation of methacrylonitrile polymers and copolymers.
|
Mahmoud, M. A. F. (1985). Continuously penetrating bodies in granular materials, Original typescript.
|
Mahmoud, M. S. (1990). Extrusion processing of rapidly solidified Al-Li alloys.
|
Maiti, S., p. a. p. Chromatography of polymers, et al. (1979). Chromatography of polymers, petroleum and petrochemicals. Calcutta, The Symposium.
|
Maj, P. E. (1985). Synthesis and charecterisation of some fibre forming thermotrpic polymers, Leeds.
|
Maj, P. E. P. and L. University of (1985). Synthesis and characterisation of some fibre forming thermotropic polymers, University of Leeds.
|
