Livingston, W. R. (1980). The adsorption of hydrophylic polymers by synthetic hectorite. Birmingham, University of Birmingham.
|
Llewelyn, E. S. (1997). Novel methods in the analysis of polymers using vibrational spectroscopy, Original typescript.
|
Lloyd Douglas, R., C. Ward Thomas, et al. (1989). Inverse gas chromatography: characterizations of polymers and other materials. Washington, D.C, American Chemical Society.
|
Lloyd Douglas, R., E. American Chemical Society Division of Polymeric Materials: Science and, et al. (1989). Inverse gas chromatography: characterization of polymers and other materials: Symposium on polymer characterization by inverse gas chromatography: 3rd Chemical congress of North America: Papers. Washington, DC, American Chemical Society.
|
Lloyd Paul, M. (1998). Matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry of synthetic polymers, University of Warwick.
|
Lloyd, D. R., American Chemical Society. Division of Polymeric Materials: Science and Engineering., et al. (1989). Inverse gas chromatography: characterization of polymers and other materials. Washington, DC, American Chemical Society.
|
Lloyd, P. J., C. Particle Size Analysis, et al. (1986). Particle size analysis 1985. Chichester, Wiley.
|
Lloyd's Registerof, S. and E. Great Britain. Department of (1985). Complex tubular joints: assessment of stress concentration factors for fatigue analysis. London, HMSO.
|
Loader, C. B. (2000). Structural properties of multi-layered materials.
|
Loadman, M. J. R. and C. Wake William (1998). Analysis of rubber and rubber-like polymers. Dordrecht; London, Kluwer Academic.
|
Lobley, C. M. (1999). Tape casting as a novel processing route for silicon carbide fibre-reinforced titanium metal matrix composites.
|
Lock, P. A. (2001). Estimating the permeability of reservoir sandstones using image analysis of pore structure.
|
Lockett, F. J. and A. National Physical Laboratory Division of Materials (1983). NPL polymers and composites research. Teddington, National Physical Laboratory Division of Materials Applications.
|
Lockett, F. J. and A. National Physical Laboratory. Division of Materials (1982). Engineering design basis for plastics products. Teddington, Division of Materials Applications, National Physical Laboratory.
|
Lockman, Z. (2003). Surface oxidation epitaxy of (100)<001>-nickel and nickel-based alloys: 332 leaves.
|
Loening, K. L. and D. International Union of Pure and Applied Chemistry. Macromolecular (1978). List of Standard Abbreviations for Synthetic Polymers and Polymer Materials. Oxford, Pergamon P.
|
Loevenich Peter, W. (2001). The effect of fluorine substituents in conjugated polymers, University of Durham.
|
Lögdlund, M. (1993). The electronic and chemical structure of some conjugated polymers and molecules and their interaction with metals studied by photoelectron spectroscopy, Linkoping University.
|
Loh Nee, L. and E. Nanyang Technological University School of Mechanical and Production, Eds. (1997). Special volume incorporating expanded papers from the proceedings of the international conference on mechanics of solids and materials engineering, Elsevier.
|
London, England, ASM International;
|
Long, S. (1996). Cast fibrous MMCs: transfer phenomena and micro-structure formation.
|
Longchal, M. (1969). The natural weathering of composite materials subjected to torsional stress. Garston, Building Research Station.
|
Longman, G. W. (1980). X-ray diffraction studies of short range ordering in amorphous polymers, University of Bradford.
|
Loo, T. T., C. T. Sun, et al. (1986). Composite materials and structures: International symposium: Papers. Lancaster, Pa., U.S.A., Technomic Pub. Co.
|
Loo, T. T., C. T. Sun, et al. (1986). Proceedings: International Symposium on Composite Materials and Structures, June 10-13, 1986, Beijing, China. Lancaster, Pa., U.S.A., Technomic Pub. Co.
|
Lopez Espino, H. A., A. Garforth, et al. (2001). An investigation of the catalytic degradation of polymers. Manchester, UMIST.
|
Lopez, X. (2004). Pore-scale modelling of non-newtonian flow: 159 leaves.
|
Lorimer, C. J. and B. Queen's University of (2002). Stimuli responsive polymers as medical implants.
|
Los Alamos Neutron Scattering, C. and S. Center for Materials (1990). Neutron scattering studies of polymers: Workshop: Papers, Gordon and Breach Science.
|
Lota, J. S. (1994). The hydration of class G oilwell cement.
|
Loud, S. and E. Society for the Advancement of Material and Process, Eds. (2000). Bridging the centuries with SAMPE's materials and processes technology, SAMPE.
|
Louthan, M. R., R. P. McNitt, et al., Eds. (1987). Environmental degradation of engineering materials III: 3rd International conference: Papers, Pennsylvania State University.
|
Loveday, M. S., M. F. Day, et al. (1982). Measurement of high temperature mechanical properties of materials: based on the edited proceedings of a symposium held from 3-5 June 1981 at the National Physical Laboratory, Teddington, England. London, H.M.S.O.
|
Lovell, P. A. and M. S. El-Aasser (1997). Emulsion polymerization and emulsion polymers. New York, J. Wiley.
|
Lovenich, P. W. (2001). The effect of flourine substituents in conjugated polymers, [Durham].
|
Low, A. (1977). An investigation into the microstructure of amorphous and semicrystalline polymers using electron microscopy techniques.
|
Lowden, B. D. (1993). A methodology for the quantification of outcrop permeability heterogeneities through minipermeametry.
|
Lowe, R. J. (1969). The turbulent shear flow of dilute solutions of long chain polymers.
|
Lowen Stephen, V. (1988). Mechanistic aspects of the electropolymerization of heterocyclic aromatics to form conducting polymers, Simon Fraser University.
|
Lowndes Gareth, J. (1994). Investigation into the synthesis of biodegradable polymers for use as drug targeting agents, University of Bath.
|
