Levi David, W. and A. Teetsel Dorothy (1966). Dielectric properties of polymers. A bibliography, etc, Dover.
|
Lewin, M. (1988). Polymers for advanced technologies. New York, N.Y., VCH.
|
Lewin, M. and D. International Union of Pure and Applied Chemistry Macromolecular (1988). Polymers for advanced technologies: International symposium: 3rd Conference on macromolecular science: Selected papers. New York, N.Y., VCH Publishers.
|
Lewin, M., Ed. (1988). Polymers for biosystems, Huthig & Wepf.
|
Lewin, M., T. International Symposium on Polymers for Advanced, et al. (1988). Invited lectures and selected contributed papers presented at the International Symposium on Polymers for Advanced Technologies held in Jerusalem, Israel. 1987. Weinheim, VCH.
|
Lewin, M., T. International Symposium on Polymers for Advanced, et al., Eds. (1988). Polymers for advanced technologies: IUPAC Internaional Symposium. New York, N.Y., VCH.
|
Lewis Karen, J. (1996). Biodegradable polymers for the sustained delivery of antisense nucleic acids, University of Aston in Birmingham.
|
Lewis Norman, G., G. Paice Michael, et al. (1989). Plant cell wall polymers: biogenesis and biodegradation: Symposium: 3rd Chemical congress of North America: Papers. Washington, DC, American Chemical Society.
|
Lewis, E. M. H. (2002). A numerical investigation into the fluid and containment transport properties of mine waste rocks: 186 leaves.
|
Lewis, G. P., R. J. Barnhurst, et al. (1986). Proceedings. [Montreal, Quebec], Metallurgical Society, CIM.
|
Lewis, G. S. (2002). Low temperature sintering of solid oxide fuel cell electrolytes: 191 leaves.
|
Lewis, J. C., G. Sines, et al. (1983). Fracture mechanics: fourteenth symposium. Philadelphia, ASTM.
|
Lewis, M. C. (1996). Heat curing and delayed ettringite formation in concretes.
|
Lewis, N. G., M. G. Paice, et al. (1989). Plant cell wall polymers: biogenesis and biodegradation. Washington, DC, American Chemical Society.
|
Lewis, P. R., K. Reynolds, et al. (2004). Forensic materials engineering: case studies. Boca Raton, CRC Press.
|
Ley, K. L. (1992). Evaluation of high-T[c] superconducting Bi(Pb)-Sr-Ca-Cu-O thick films from mist pyrolysis.
|
Li, J. (1988). Chemical modification of polymers, University of Aston in Birmingham.
|
Li, M. (1993). Microstructure, thermal stability and fatigue crack growth of ceramics.
|
Li, R. K. Y., J. Harding, et al. (1987). Studies of transverse impact damage in composite materials using a Hopkinson type pressure-bar technique, University of Oxford Department of Engineering Science.
|
Li, R. K. Y., J. Harding, et al. (1987). Studies of transverse impact damage in composite materials using a Hopkinson-type pressure-bar technique, University of Oxford Department of Engineering Science.
|
Li, T. (1995). Influence of stress on photo-degradation of polymers, University of Newcastle upon Tyne.
|
Li, W. (1996). Magnetic resonance relaxation, diffusion and electrophoresis studies of colloids and polymers, University of Bristol.
|
Li, W.-Y. (1992). The fabrication of silicon nitride-titanium nitride composite materials, Leeds.
|
Li, Y. (1997). A study of surfactant aggregates (a) in the presence of neutral polymers, and (b) as potential lubricants, University of Salford.
|
Li, Z. (2004). Simulation of solute and fluid transport in deformable tissues using poroelastic models: 155 leaves.
|
Liang, M. S. (2001). Carbon doping in GaAs, AlGaAs, InGaAs and distributed Bragg reflectors. Liverpool, Thesis Ph.D.
|
Liang, Z. (1989). Electro chemical behaviour of cuprous sulphide (Cu[2+]S) in alkaline electrolytes.
|
Liao, P. (1996). Tribological behaviour and thermal analysis of polymers and polymer composites in unlubricated rolling-sliding contact. Birmingham, University of Birmingham.
|
Libby, H. L. (1971). Introduction to electromagnetic nondestructive test methods. New York; Chichester, Wiley-Interscience.
|
Libowitz, G. G. and M. S. Whittingham (1979). Materials science in energy technology. New York (etc.); London, Academic Press.
|
Licari, J. J. (2003). Coating materials for electronic applications: polymers, processes, reliability, testing. Norwich, NY, Noyes Publications/William Andrew Publ.
|
Liddicott, K. M. (1994). High temperature materials chemistry of doped cerium oxide ceramics.
|
Liebermann, H. H. (1993). Rapidly solidfied alloys: processes, structures, properties, applications. New York, M. Dekker.
|
Liebman Joel, F. and A. Greenberg (1989). From atoms to polymers: isoelectronic analogies, VCH.
|
Liebman, J. F. and A. Greenberg (1989). From atoms to polymers: isoelectronic analogies. New York, N.Y., VCH Publishers.
|
Liebowitz, H., N. Perrone, et al. (1970). Mechanics of composite materials: proceedings of the fifth symposium on naval structural mechanics. Oxford, Pergamon.
|
Liem, H. M. (2003). Raman spectroscopy on conjugated polymers - effective probe of molecular orientation and phase transitions in conjugated polymers: 255 leaves.
|
Liem, H. M. and L. University of (2003). Raman spectroscopy on conjugated polymers: effective probe of molecular orientation and phase transitions in conjugated polymers. London, University of London.
|
Lieurade, H. P. and T. Institute for Industrial Technology, Eds. (1989). Fatigue & stress: 2nd International conference on fatigue and stress of engineering materials and components: Selected papers. Technology transfer series. Gournay-Sur-Marne, IITT International.
|
Liew, M. C. and C. University of Manchester. Department of (1991). Characterization of very high molecular weight water soluble polymers. Manchester, University of Manchester.
|
