Kilbinger Andreas, F. (1998). Self-organising amphiphilic oligothiophene block co-polymers, University of Durham.
|
Kilbinger, A. F. M. (1999). Self-organising amphiphilic oligothiopene block co-polymers, Durham.
|
Kim, H. S. (1989). Development of a fibre-reinforced glass-ceramic composite.
|
Kim, I. T. (1992). The viscoelastic properties of polystyrene particles bearing adsorbed polymers.
|
Kimmance, J. P. (1988). Computer aided risk analysis of open pit mine slopes in kaolin mineral deposits.
|
Kimpara, I., H. Miyairi, et al., Eds. (1995). Composites '95: recent advances in Japan and the United States: 7th Japan-US conference on composite materials: Papers and programme. Tokyo, Japan Society for Composite Materials.
|
Kinahan, M. (2002). Influence of supercritical fluid technology on the physicochemical and morphological properties of biodegradable polymers and drug-polymer systems. Manchester, University of Manchester.
|
Kincaid, D. and R. Richards (1982). LEARNING through science: materials. G.B., Macdonald/Schools Council.
|
Kinderlehrer, D. and A. Institute for Mathematics and its (1993). Microstructure and phase transition. New York; London, Springer-Verlag.
|
King, A. and V. H. Wentworth (1954). Raw materials for electric cables. London, Benn.
|
King, B. M. (2001). Optimal mine scheduling policies.
|
King, B. W., J. F. Alder, et al. (1984). The investigation of the use of polymers as coating materials for a piezoelectric quartz-crystal realtive humidity sensor. Manchester, UMIST.
|
King, D. and U. Cranfield (2002). The synthesis of energetic polymers via the introduction of energetic substituents onto existing polymers. [Cranfield], Cranfield University.
|
King, G. (1995). Substituted poly(benzo[c]thiophenes): new low band-gap conducting polymers, University of Liverpool.
|
King, G. (1995). Substituted poly(benzothiophenes): new low band-gap conducting polymers.
|
King, J., P. Greaves, et al. (1996). Composite materials in aeroengine gas turbines performance: potential vs commercial constraint?, Rolls-Royce plc.
|
King, P. P. (1982). Statistical mechanics of charged polymers in solution, University of Cambridge.
|
King, R. G. (1988). Surface treatment and finishing of aluminium. Oxford; New York, Pergamon Books.
|
King, R. I. (1985). Handbook of high-speed machining technology. New York; London, Chapman and Hall.
|
Kinloch, A. J. and R. J. Young (1983). Fracture behaviour of polymers. London; New York
|
Kinloch, A. J. and R. J. Young (1995). Fracture behaviour of polymers. London, Chapman & Hall.
|
Kiratisaevee, H. (2004). Fracture properties and impact response of novel lightweight sandwich structures. Liverpool, Thesis Ph.D.
|
Kirby Neil, A. (1988). Liquid crystal polymers, University of Sussex.
|
Kirk Raymond, E., F. Othmer Donald, et al. (1993). Encyclopedia of chemical technology. New York; Chichester, Wiley.
|
Kirk, G. E. and p. Rolls-Royce (1989). Composite materials for future aeroengines, Rolls-Royce plc.
|
Kirk, R. E. and D. F. Othmer (1998). Encyclopedia of chemical technology. New York; Chichester, Wiley.
|
Kirk, R. E., D. F. Othmer, et al. (1991). Encyclopedia of chemical technology. New York, Wiley.
|
Kirpichnikov, P. A. (2002). First Kirpichnikov readings degradation and stabilization of polymers.
|
Kirsch, N. (2000). Molecular recognition of poorly functionalised molecules with imprinted polymers, University of Reading.
|
Kirtley, N. (1998). Interfacial and polymer chemistry of methacrylate based composite materials, University of Sunderland.
|
Kishi, M. and B. University of Aston in (1987). Synthetic polymers for ophthalmic applications. Birmingham, University of Aston.
|
Kissin, Y. V. (1985). Isospecific polymerization of olefins with heterogeneous Ziegler-Natta catalysts. New York, Springer-Verlag.
|
Kittler, M., H. Richter, et al. (1991). Gettering and defect engineering in the semiconductor technology, GADEST '91: proceedings of the 4th International Autumn Meeting, held in Chossewitz, near Frankfurt (Oder), Germany, October 13-19, 1991. Vaduz, Sci-Tech.
|
Kittler, M., T. International Autumn Meeting "Gettering and Defect Engineering in the Semiconductor, et al. (1989). Proceedings of the 3rd International Autumn Meeting Gettering and Defect Engineering in the Semiconductor Technology, GADEST '89: Garzau, German Democratic Republic, October 8-13, 1989. Vaduz, Sci-Tech.
|
Kleintjens, L. A. and M. Rolduc Polymer (1998). "Petro" polymers vs "green" polymers. Zug, Huthig & Wepf.
|
Kleintjens, L. A. and P. J. Lemstra (1986). Integration of fundamental polymer science and technology: the proceedings of an international meeting on polymer science and technology held at Rolduc Abbey, Limburg, The Netherlands, 14-18 April 1985. London; New York; New York, NY, USA, Elsevier Applied Science Publishers: Sole distributor in the USA and Canada, Elsevier Science Pub. Co.
|
Kleintjens, L. A., Ed. (1993). Rise and decline of high performance polymers in Europe: 8th Polymer meeting: Selected papers, Huthig and Wepf.
|
Kleintjens, L. A., Ed. (1998). "Petro" polymers vs. "Green" polymers, Huthig and Wepf Verlag.
|
Kleintjens, L. A., H. Berghmans, et al. (1993). 8th Rolduc Polymer Meeting: rise and decline of high performance polymers in Europe: Rolduc Abbey, Kerkrade, The Netherlands, May 3-6, 1993. Basel, Huthig & Wepf.
|
Klenin, V. J. and S. I. A. Frenkel* (1999). Thermodynamics of systems containing flexible-chain polymers. Amsterdam; New York, Elsevier.
|
