Katz, D. M. (1992). Holographic interferometry in the biomechanical analysis of loading patterns in the human femur.
|
Kaufman, J. G. and M. American Society for Testing and (1975). Properties of materials for liquefied natural gas tankage: a symposium presented at May Committee Week American Society for Testing and Materials, Boston, Mass., 21-22 May 1974. Philadelphia, ASTM.
|
Kausch, H. H. (1978). Polymer fracture. Berlin; New York, Springer-Verlag.
|
Kausch, H. H. (1985). Polymer fracture. Berlin; New York, Springer-Verlag.
|
Kausch, H. H. (1990). Crazing in polymers. Vol.2, Springer-Verlag.
|
Kausch, H. H. and A. S. Argon (1983). Crazing in polymers. Berlin; New York, Springer-Verlag.
|
Kausch, H. H. and H. G. Zachmann, Eds. (1985). Characterization of polymers in the solid state. Berlin, Springer-Verlag.
|
Kausch, H. H. and N. Anjum (2003). Radiation effects on polymers for biological use. Berlin; London, Springer.
|
Kausch, H. H., A. S. Argon, et al. (1990). Crazing in polymers. Berlin; London, Springer-Verlag.
|
Kausch, H. H., Ed. (1983). Crazing in polymers. Berlin, Springer-Verlag.
|
Kausch, H. H., H. G. Zachmann, et al. (1985). Characterization of polymers in the solid state I: Part A, NMR and other spectroscopic methods; Part B, Mechanical methods. Berlin; New York, Springer-Verlag.
|
Kausch, H. H., J. A. Hassell, et al. (1973). Deformation and fracture of high polymers. New York, Plenum Press.
|
Kausch, H. H., P. European Physical Society Section of Macromolecular, et al., Eds. (1990). Crazing in polymers: 20th Europhysics conference on macromolecular physics: Papers, Springer.
|
Kaw, A. K. (1997). Mechanics of composite materials. Boca Raton, CRC Press.
|
Kawakatsu, T. (2004). Statistical physics of polymers: an introduction. Berlin; New York, Springer.
|
Kawase, T. and C. University of (2002). Device structures made with semiconductive conjugated polymers. Cambridge, University of Cambridge.
|
Kawata, K., T. Akasaka, et al. (1981). Composite materials: mechanics, mechanical properties and fabrication: Japan-U.S. conference, Tokyo, Japan, 1981. Tokyo, Japan Society for Composite Materials.
|
Kawata, K., T. Akasaka, et al. (1982). Composite materials: mechanics, mechanical properties and fabrication: Japan-US conference: Papers. Barking, Applied Science Publishers for Japan Society for Composite Materials, Tokyo.
|
Kawata, K., T. Akasaka, et al. (1982). Composite materials: mechanics, mechanical properties and fabrication; Japan-US conference Tokyo, Japan 1981. Barking, Applied Science Publishers for Japan Society for Composite Materials, Tokyo.
|
Kay, M. L. (1995). Factors affecting the failure mechanisms in compression after impact of continuous fibre composites.
|
Kazakevics Arnis, A. R. (1984). Studies on the reduction of formaldehyde emission from particleboard by polymers, Auckland Univesity.
|
Kê, B., S. American Chemical, et al. (1964). Thermal analysis of high polymers. American Chemical Society Symposium held at New York. September 11-12, 1963. [Papers]. Easton (Pa), Interscience.
|
Kearton Brian, L. (2001). Controlled free radical cyclisations in imprinted polymers, University of Nottingham.
|
Kedward, K. T. and ASTM Committee D-30 on High Modulus Fibers and Their Composites. (1981). Joining of composite materials: a symposium, Minneapolis, Minn., 16 April 1980. Philadelphia, Pa. (1916 Race St., Philadelphia 19103), ASTM.
|
Kedward, K. T., Ed. (1981). Joining of composite materials. Philadelphia, American Society for Testing and Materials.
|
Kedward, K. T., M. Joining of Composite, et al. (1981). Joining of composite materials: a symposium. Philadelphia, Pa, American Society for testing and Materials.
|
Kedward, K. T., M. Symposium on Joining of Composite, et al. (1981). Joining of Composite Materials: a symposium sponsored by ASTM Committee D-30 on High Modulus Fibers and their Composites. Minneapolis, Minn., 16 April 1980.
|
Keinath, S. E. and Michigan Molecular Institute. (1980). Molecular motion in polymers by ESR: papers presented at the Eighth Midland Macromolecular Meeting held between August 21-25, 1978, at Midland, Michigan. Chur, [Switzerland]; New York, Published for MMI Press by Harwood Academic Publishers.
|
Keinath, S. E., M. Midland Macromolecular, et al. (1979). Molecular motion in polymers by ESR: papers presented at the Eighth Midland Macromolecular Meeting held between August 21-25, 1978, at Midland, Michigan. Chur, [Switzerland]; New York, Published for MMI Press by Harwood Academic Publishers.
|
Keinath, S. E., R. L. Miller, et al. (1987). Order in the amorphous "state" of polymers. New York, Plenum Press.
|
Keller, T., E. International Association for Bridge and Structural, et al. (2003). Use of fibre reinforced polymers in bridge construction. Zurich, IABSE-AIPC-IVBH.
|
Kellermayer Miklos, S. Z., J. Kasianowicz John, et al. (2002). Structure and dynamics of confined polymers: proceedings of the NATO Advanced Research Workshop on biological, biophysical and theoretical aspects of polymer structure and transport, held in Bikal, Hungary, June 20-25, 1999.
|
Kellermayer, M., W. Deamer David, et al. (2002). Structure and dynamics of confined polymers. Dordrecht; London, Kluwer Academic published in cooperation with NATO Scientific Affairs Division.
|
Kells, D. (1979). Stress fields in glassy polymers: with particular reference to the compressive failure of polystyrene. Birmingham, University of Birmingham.
|
Kelly, A. (1989). Concise encyclopedia of composite materials. Oxford, Pergamon.
|
Kelly, A. (1999). Public lectures. Singapore, Office of University Relations, National University of Singapore.
|
Kelly, A. and C. H. Zweben (2000). Comprehensive composite materials. Amsterdam; New York, Elsevier.
|
Kelly, A. and M. Institution of (1965). Composite materials; lectures delivered at the Instituti of Metallurgists refresher course, Nov. 1965, Iliffe for Inst.
|
Kelly, A., R. W. Cahn, et al. (1994). Concise encyclopedia of composite materials. Oxford, England; New York, Pergamon.
|
Kelly, G. A. and B. University of Wales (2003). Synthetic studies of ferrocene-containing monomers and polymers.
|
