Jones, T. T., D. International Union of Pure and Applied Chemistry. Macromolecular, et al. (1976). The effect of molecular orientation on the mechanical properties of polystyrene: a report of the IUPAC Working Party on 'Structure and Properties of Commercial Polymers'---; prepared for publication and presented at the IUPAC International Symposium on Macromolecules, Aberdeen, 10-14 September 1973. Oxford, Pergamon.
|
Jones, T., H. Berger, et al. (1995). Nondestructive inspection of composite materials. Lancaster, Pa, Technomic.
|
Jonforsen, M. and T. Chalmers tekniska högskola Department of Polymer (2002). Synthesis and characterisation of conjugated polymers with high electron affinity. Goteborg, Department of Polymer Technology, Chalmers University of Technology.
|
Jong, E. N. T. (1992). Particulate-reinforced metal matrix composites based on titanium alloys.
|
Jonker-Brash, R. A. (1995). Erosion of refractories: mechanisms for graphite dissolution by iron-carbon melts.
|
Jönsson, B. (1998). Surfactants and polymers in aqueous solution. Chichester; New York, John Wiley & Sons.
|
Jönsson, B. (2000). Surfactants and polymers in aqueous solution. Chichester, John Wiley.
|
Jonsson, B., B. Lindman, et al. (1999). Surfactants and polymers in aqueous solution. Chichester; New York, John Wiley & Sons.
|
Jordan (1988). Esthetic composite bonding: techniques and materials. Toronto; Oxford, B.C. Decker: Blackwell Scientific.
|
Jordan, R. E. (1986). Esthetic composite bonding: techniques and materials. Toronto; Philadelphia; London, Decker: Mosby.
|
Jordan, R. E. (1987). Esthetic composite bonding: techniques and materials. [Santa Maria, Ca.], Den-Mat Corporation.
|
Jordan, R. E. (1993). Esthetic composite bonding: techniques and materials. St. Louis; London, Mosby Year Book.
|
Jordan, R. M. and S. University of Oxford. Faculty of Physical (1970). Studies of composite materials grown in situ.
|
Joseph, C. and Sons (1965). Rumanian industry. Warrington (Lancs.), Joseph Crosfield & Sons.
|
Joseph, P. (1997). Flame retardance in styrenic and acrylic polymers with covalently-bound phosphorus-containing groups, University of Lancaster.
|
Joseph, R. (2001). Development of an injection moulding grade hydroxyadatite polyethylene composite.
|
Joseph, S. H. (1976). The effects of pressure on nonlinear viscoelasticity in polymers, Leeds.
|
Joss, V. (1998). Surface treatment of PVC. Liverpool, Thesis Ph.D.
|
Jowett, C. E. (1971). Materials in electronics. London, Business Books.
|
Joyce Steven, J. (1992). The topological trapping of cyclic polymers into polymer networks, University of York.
|
Ju Jiann-Wen, W., G. Z. Voyiadjis, et al. (1998). Damage mechanics in engineering materials. Amsterdam; New York, Elsevier.
|
Ju, J. W., H. L. Schreyer, et al., Eds. (1990). Damage mechanics in engineering materials: Symposium: Winter annual meeting: Papers. ASME Pub MD; vol 24, ASME.
|
Jung, B. and I. Max-Planck-Institut für (1997). Parallel algorithms for MD-simulations of synthetic polymers. Saarbrucken, Max-Planck-Institut fur Informatik.
|
Jungnickel, B.-J. and W. J. Bartz (1992). Solid state forming of polymers. London, Mechanical Engineering Publications.
|
Juniper, R. (1981). Pharmaceutical applications of polymers: a selected bibliography. Shrewsbury, Rubber and Plastics Research Association.
|
Juniper, R. and A. Rubber and Plastics Research (1981). Pharmacentical applications of polymers: a selected bibliography. Shrewsbury, RAPRA.
|
K*obunshi Gakkai (Japan) (1990). 3rd SPSJ International Polymer Conference: preprints: membranes and interfacial phenomena of polymers: Nagoya, Japan, November 26-29 1990. Tokyo, Japan, Society of Polymer Science.
|
Kabre, S. P. (1964). Rheology and suspension activity of pseudoplastic polymers I.
|
Kabre, S. P. (1964). Rheology and suspension activity of pseudoplastic polymers II.
|
Kadhim, M. J. (1990). Laser cladding of ceramics and sealing of plasma sprayed zirconia based thermal barrier coatings.
|
Kaeding, A. O. and R. C. Prusinski (2003). Polymers in concrete: the first thirty years. Farmington Hills, Michigan, ACI International.
|
Kaeding, A. O., R. C. Prusinski, et al. (2003). Polymers in concrete: the first thirty years. Farmington Hills, Mich., American Concrete Institute.
|
Kaeding, A. O., R. C. Prusinski, et al., Eds. (2003). Polymers in concrete: the fisrt thirty years, ACI International.
|
Kaelble, D. H. (1985). Computer-aided design of polymers and composites. New York, M. Dekker.
|
Kahovec, J. and C. Academy of Sciences of the Czech Republic Institute of Macromolecular, Eds. (2001). Polymers in medicine: Invited lectures presented at the 40th microsymposium of the Prague meetings on macromolecules, Wiley.
|
Kahovec, J. and C. International Union of Pure and Applied, Eds. (1998). Invited and contributing lectures presented at the 38th microsymposium on recycling of polymers, WILEY-VCH.
|
Kahovec, J., B. a. E. A. Microsymposium on Macromolecules degradable Polymers: Chemical, et al. (1997). Plenary lectures presented at the 37th Microsymposium on Macromolecules (Bio)degradable Polymers: Chemical, Biological and Environmental Aspects held in Prague, Czech Republic, 15-18 July 1996. Zug, Huthig & Wepf.
|
Kahovec, J., B. Sedlacek, et al. (1985). Polymers in medicine and biology: short special lectures and posters presented at the "26th Microsymposium on Macromolecules" in Prague, Chekoslovakia, July 1984. Basel; New York, Huthig und Wepf.
|
Kahovec, J., C. European Macromolecular, et al., Eds. (1994). Optics and dynamics of polymers: 33rd Microsymposium on macromolecules: Papers, IUPAC.
|
Kahovec, J., D. International Union of Pure and Applied Chemistry Macromolecular, et al., Eds. (1997). (Bio)degradable polymers: chemical, biological and environmental aspects, Huthig & Wepf.
|
