Hollins, B. P. and S. University of Oxford. Faculty of Physical (1988). The future role of ceramic fibres in advanced composite materials.
|
Holmberg, K. (2002). Surfactants and polymers in aqueous solution. New York; Chichester, Wiley.
|
Holmberg, K. (2003). Surfactants and polymers in aqueous solution. Chichester, West Sussex, England; Hoboken, NJ, John Wiley & Sons.
|
Holmes Andrew, B., C. Moratti Stephen, et al. (1995). Conjugated polymers for light-emitting diodes - plastronics. [Australia], Royal Australian Chemical Institute. Victorian Polymer Group.
|
Holsenburger, R. S., A. Garforth, et al. (1997). Catalytic degradation of polymers over zeolites. Manchester, UMIST.
|
Holt, J. M. and E. o. M. T. American Society for Testing and Materials. Committee (1977). Reproducibility and accuracy of mechanical tests: a symposium sponsored by ASTM Committee E-28 on Mechanical Testing, American Society for Testing and Materials, St. Louis, Mo., 5 May 1976. Philadelphia, ASTM.
|
Holt, J. M., P. Huddersfield, et al. (1985). Studies on the formation of water soluble vinyl polymers, Huddersfield Polytechnic.
|
Holton, S. L. (1997). The adhesion of plasma-treated polymer-films.
|
Hommel, H. (1998). Polymers and surfaces: a versatile combination. Trivandrum, Research Signpost.
|
Homolka, D. T. (1997). The application of boundary integral and particle methods in modelling fluid displacement in petroleum reservoirs.
|
Honeyman Charles, H. (1992). En route to new inorganic rings and polymers: the reactions of Cl2RP=NSiMe3 (R = Cl or Ph) with main group and transition metal chlorides. Toronto, University of Toronto.
|
Honeyman, G., C. Institute of Metals Materials Science, et al. (1989). Non-destructive testing: 5th Seminar: Papers, Institute of Metals.
|
Hoo, J. J. C., A. o. B. S. American Society for Testing and Materials. Subcommittee, et al. (1988). Effect of steel manufacturing processes on the quality of bearing steels. Philadelphia, PA, ASTM.
|
Hooper Steven, J. and M. American Society for Testing and, Eds. (1997). Composite materials: testing and design, American Society for Testing and Materials.
|
Hooper, S. J. and D. Symposium on Composite Materials: Testing and (1997). Composite materials: testing and design (thirteenth volume). West Conshohocken, PA, ASTM.
|
Hooper, S. J., M. American Society for Testing and, et al. (1997). Composite materials: testing and design. Vol. 13. West Conshohocken, Pa., ASTM.
|
Hopfe, H. H. and C. R. Hwang (1993). Computer aided analysis of the stress/strain response of high polymers: text, tutorial, software. Lancaster, Pa., Technomic.
|
Hopfe, H. H. and C. R. Hwang (1993). Computer aided analysis of the stress/strain response of high polymers. Lancaster, Pa., Technomic.
|
Hornak Lawrence, A. (1992). Polymers for lightwave and integrated optics: technology and applications. New York, N.Y., Marcel Dekker.
|
Hornak, L. A. (1992). Polymers for lightwave and integrated optics: technology and applications. New York, M. Dekker.
|
Hornak, L. A. and I. NetLibrary (1992). Polymers for lightwave and integrated optics: technology and applications. New York, M. Dekker.
|
Hornfeld, H. L., J. Brandt, et al., Eds. (1992). Advanced materials and structures from research to application: 13th European Chapter conference: Papers, SAMPE.
|
Hörsting, K. (1998). Rationalising the production of long fibre reinforced composite materials using multiaxial multiply fabrics. Aachen, Shaker.
|
Horton, J. C. and C. University of (1987). Neutron scattering from star-branched polymers, University of Cambridge.
|
Hosei University Research Center of Ion Beam, T. (1995). Materials science and engineering: 13th Symposium: Papers, Hosei University.
|
Hosei University Research Center of Ion Beam, T. (1997). Proceedings of the 15th symposium on materials science and engineering, Research Center of Ion Beam Technology, Hosei University.
|
Hosford, W. F. (2005). Physical metallurgy. Boca Raton, Taylor & Francis.
|
Hoskin, B. C. and A. A. Baker (1986). Composite materials for aircraft structures. New York, N.Y., American Institute of Aeronautics and Astronautics.
|
Hoskins Alan, R. (1992). Mechanism of the dissolution of acrylonitrile based polymers in aqueous inorganic salt solutions, University of Bradford.
|
Hosseini, S. M. (1989). Contact configuration effects on the dry and lubricated wear of polymers, Brunel University.
|
Hostettler, F. and A. Plastics Technology (1978). Research on composite materials comprising reaction injection molded combinations of carbon fibres.
|
Houghton, S. J. (1996). Hydration and durability of calcium aluminate cements.
|
House, D. C., Tollett, et al. (1987). Conductive polymers, R & D Clearing House.
|
Houwink, R. (1947). Technology of synthetic polymers, (in its chemical and physical aspects). New York, Elsevier Publishing Company, inc.
|
Houwink, R. (1947). Technology of Synthetic Polymers, in its chemical and physical aspects, etc. New York, printed in the Netherlands, Elsevier Publishing Co.
|
Houwink, R. (1949). Fundamentals of synthetic polymer technology in its chemical and physical aspects. New York, Elsevier Pub. Co.
|
Houwink, R. (1949). Fundamentals of Synthetic Polymer Technology, etc. (Second, completely revised edition [of "Technology of Synthetic Polymers"].). New York; 's-Hertogenbosch printed, Elsevier Publishing Co.
|
Houwink, R. and H. Arends (1947). Technology of synthetic polymers (in its chemical and physical aspects). New York, Elsevier Pub. Co.
|
Houwink, R. and International Union of Pure and Applied Chemistry. Plastics and High Polymers Division. (1960). Classifications of high polymers: a review. London, Butterworths Scientific Publications.
|
Howell DeWayne, D., J. Green, et al., Eds. (1999). Advanced materials & processes: preparing for the new millennium: 31st international SAMPE technical conference, SAMPE.
|
