Hayashi, T., K. Kawata, et al. (1982). Progress in science and engineering of composites: proceedings of the Fourth International Conference on Composite Materials, ICCM-IV Oct 25-28 1982 Tokyo Japan. Tokyo; Amsterdam; Oxford, Japan Society for Composite Materials: North-Holland.
|
Hayavi, S. and B. University of Aston in (2002). Novel formulations for antigen delivery using biodegradable polymers: new approaches for the use of new and established adjuvants. Birmingham, University of Aston in Birmingham.
|
Hayes, T. L., M. Angrist, et al. (1999). Natural polymers. Cleveland, Freedonia Group.
|
Haylett, N. (1995). Investigations into the synthesis, characterisation and properties of some conjugated organic polymers, University of Durham.
|
Hazeldine, P. (2000). An investigation into the sintering of copper alloy bearings. Liverpool, Thesis Ph.D.
|
He, Z.-q. (1993). Structural modification in rigid and semi-flexible polymers, University of Reading.
|
Heaton, C. A. (1986). The Chemical industry. Glasgow, Blackie.
|
Heaton, M. D. and T. University of Manchester. Institute of Science and (1968). Fibre and filler reinforcement of polymers and other materials.
|
Hebb, A. K. (2004). Synthesis of well-defined monolithic porous polymers using compressed fluid solvents. Liverpool, Thesis Ph.D.
|
Hebeish, A. and J. T. Guthrie (1981). The chemistry and technology of cellulosic copolymers. Berlin; New York, Springer-Verlag.
|
Hedrick James, L., W. Labadie Jeff, et al., Eds. (1996). Step-growth polymers for high-performance materials: new synthetic methods, ACS.
|
Hedrick, J. L., J. W. Labadie, et al. (1996). Step-growth polymers for high-performance materials: new synthetic methods. Washington, DC, American Chemical Society.
|
Hedvig, P. (1977). Dielectric spectroscopy of polymers. Budapest, Akadémiai Kiadó.
|
Heeger Alan, J., R. Ulrich Donald, et al. (1988). Nonlinear optical properties of polymers: Symposium: Fall meeting: Papers. Pittsburgh, Pa., Materials Research Society.
|
Heeger, A. J., J. Orenstein, et al. (1988). Nonlinear optical properties of polymers: symposium held December 1-3, 1987, Boston, Massachusetts, U.S.A. Pittsburgh, Pa, Materials Research Society.
|
Heeger, A. J., J. Orenstein, et al. (1988). Nonlinear optical properties of polymers: symposium held December 1-3, 1987, Boston, Massachusetts, U.S.A. Pittsburgh, Pa., Materials Research Society.
|
Heeger, A. J., J. Orenstein, et al. (1988). Nonlinear optical properties of polymers. Pittsburgh, Materials Research Society.
|
Heeley, G. (1992). Ion exchange materials based on lignin.
|
Heeley, J. A. (1992). On the biodegradation of biomedical polymers.
|
Heffernan, J. G. and S. University of (1982). The synthesis and use of hydrophilic polymers in catalysis and gel permeation chromatography. Glasgow, University of Strathclyde.
|
Heijboer, J. (1972). Mechanical properties of glassy polymers containing saturated rings. Delft, Delft University.
|
Heilmann, O. J. (1968). Mathematical polymers. København, Munksgaard.
|
Heinemann, H. and G. A. Somorjai (1985). Catalysis and surface science: developments in chemicals from methanol, hydrotreating of hydrocarbons, catalyst preparation, monomers and polymers, photocatalysis and photovoltaics. New York, M. Dekker.
|
Heinemann, H., G. A. Somorjai, et al. (1985). Catalysis and surface science: developments in chemicals from methanol, hydrotreating of hydrocarbons, catalyst preparation, monomers and polymers, photocatalysis and photovoltaics. New York, M. Dekker.
|
Heitz, W. and C. International Union of Pure and Applied (1992). Recycling of polymers: science and technology, proc. sym held Marbella, 18-20 September, 1991. Basel, Huthig & Wepf.
|
Heitz, W., M. International Symposium on Recycling of Polymers: Science and Technology, et al. (1992). Invited lectures presented at the International symposium on recycling of polymers: science and technology. Basel, Huthig & Wepf.
|
Heitz, W., T. Saegusa, et al. (1985). Polymers with specific properties: new aspects and developments: lectures presented at the 1st Macromolecular Symposium Japan-FRG, Kyoto, Japan, Aug. 16-18, 1984. Basel, Switzerland; New York, Huthig and Wepf.
|
Heldele, R. and K. Forschungszentrum (2004). Röntgenlithographie, Vernetzungs- und Pyrolyseverhalten des präkeramischen Polymers ABSE. Karlsruhe, Forschungszentrum Karlsruhe.
|
Helmstedt, M. and K. Gast (2000). Data evaluation in light scattering of polymers. Weinheim, Wiley-VCH.
|
Hemachandra, K. (1992). Mechanical behaviour of hydroxyapatite reinforced polyethylene composites.
|
Hemsley, D. A. (1984). The light microscopy of synthetic polymers. Oxford [Oxfordshire]; New York
|
Hemsley, D. A. and S. Royal Microscopical (1984). The light microscopy of synthetic polymers. Oxford [Oxfordshire]; New York; Oxford [Oxfordshire], Oxford University Press: Royal Microscopical Society.
|
Henderson, J. S., Technical Association of the Pulp and Paper Industry. Corrosion and Materials Engineering Committee., et al. (1983). The NCE recovery boiler precipitator: mill experience and design implications: a project of the Corrosion and Materials Engineering Committee, Steam and Power Committee of the Engineering Division and the Air Quality Committee of the Environmental Division. Atlanta, Ga., Tappi Press.
|
Henderson, S. (1980). Tube forming processes applied to polymers, Leeds.
|
Hendra, P. J. and J. K. Agbenyega (1993). The raman spectra of polymers. Chichester; New York, John Wiley & Sons.
|
Henley, V. F. (1982). Anodic oxidation of aluminium and its alloys. Oxford; New York, Pergamon Press.
|
Henniker, J. C. (1967). Infrared spectrometry of industrial polymers. London, New York, Academic Press.
|
Henry, B. M. (1993). A microstructural study of Au/Pd/Ti ohmic contacts for AlGaAs/GaAs heterojunction bipolar transistors.
|
Henry, S. D., K. S. Dragolich, et al. (1996). ASM handbook. Materials Park, OH, ASM International.
|
Herakovich Carl, T., M. American Society of Mechanical Engineers Winter Annual, et al. (1975). Inelastic behavior of composite materials: presented at 1975 ASME Winter Annual Meeting, Houston, Texas, November 30 - December 5, 1975. New York, American Society of Mechanical Engineers.
|
