Hansen Kenneth, D., G. McLean Francis, et al., Eds. (1992). Roller compacted concrete III: 3rd Conference: Preprints. New York, NY, American Society of Civil Engineers.
|
Hansen, K. D., F. G. McLean, et al. (1992). Roller compacted concrete III: proceedings of the conference sponsored by the Construction, Geotechnical Engineering, and Materials Engineering Divisions of the American Society of Civil Engineers, San Diego, California, February 2-5, 1992. New York, N.Y., American Society of Civil Engineers.
|
Hansen, K. D., L. K. Guice, et al. (1988). Roller compacted concrete II: proceedings of the conference. New York, NY, American Society of Civil Engineers.
|
Haque, S. (2000). Functionally graded coatings on silicon carbide monofilaments for protection in titanium composites.
|
Hardingham, C. M. (1997). GaAs and GaAs/Ge solar cells-a device and materials study using SEM-EBIC.
|
Hardisty, D. (1956). The preparation and properties of protein rayons containing vinyl polymers, Leeds.
|
Hardwicke Philip, I. (1989). Microbial synthesis of polymers: Alcaligenes eutrophus and the production of poly-'beta'-3-hydroxybutric acid (PHB), Polytechnic of Wales.
|
Hardy, C. J., J. M. Fletcher, et al. (1963). Polymers of heavy metals with dialkylphosphoric acids. London, H.M. Stationery Office.
|
Hardy, N. D. (1985). The low temperature thermal conductivity of semi-crystalline polymers, Leeds.
|
Hardy, R. and G. Hobbs (1968). Packaging of fish. Aberdeen, Torry Research Station.
|
Haritos George, K. and D. American Society of Mechanical Engineers Applied Mechanics Division Aerospace, Eds. (1991). Failure mechanisms in high temperature composite materials: Symposium: 112th Winter annual meeting: Papers. ASME -publications- AD; vol 22, ASME.
|
Haritos, G. K., G. M. Newaz, et al. (1991). Failure mechanisms in high temperature composite materials: presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Atlanta, Georgia, December 1-6, 1991. New York, N.Y., ASME.
|
Haritos, G. K., G. M. Newaz, et al. (1991). Failure mechanisms in high temperature composite materials: presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Atlanta, Georgia, December 1-6, 1991. New York, N.Y., ASME.
|
Harjoprayitno, W. W. (2001). The adhesion, fracture and durability of silica-filled epoxy adhesive joints.
|
Harkanyi, K. (1994). Selective guide to literature on materials engineering. Washington, DC, American Society for Engineering Education.
|
Harmon, J. P. and G. K. Noren (2001). Optical polymers: fibers and waveguides. Washington, DC, American Chemical Society.
|
Harms, M. C. (1996). Force measurement during spinal mobilisation.
|
Harmston, D., Sampe, et al., Eds. (1995). Materials challenge: diversification and the future: 40th International symposium: Papers, SAMPE.
|
Harold, S. C. (1992). The development of a non-adhesive wound dressing.
|
Harper, C. A. (1992). Handbook of plastics, elastomers, and composites. New York; London, McGraw-Hill.
|
Harper, E. J. (1996). Development and characterisation of a hydroxyapatite reinforced polyethylmethacrylate bone cement.
|
Harrigan, W. C., J. Strife, et al. (1985). Conference proceedings of the Fifth International Conference on Composite Materials. Warrendale, Pa., Metallurgical Society.
|
Harrington, J. F. (1997). Fluid movement in low permeability argillaceous media.
|
Harris, B. (1986). Engineering composite materials. London; Brookfield, VT, USA, Institute of Metals.
|
Harris, B. (2003). Fatigue in composite materials: science and technology of the fatigue response of fibre-reinforced plastics. Cambridge, Woodhead.
|
Harris, B. and M. Institute of (1986). Engineering composite materials. London, Institute of Metals.
|
Harris, C. L. (1989). Mass transport control of non-ferrous pyrometallurgical processes.
|
Harris, C. O. (1982). Statics and strength of materials. New York; Chichester, Wiley.
|
Harris, F. W., R. B. Seymour, et al. (1977). Structure-solubility relationships in polymers. New York, Academic Press.
|
Harris, J. E., E. C. Sykes, et al. (1975). Physical metallurgy of reactor fuel elements: proceedings of an international conference on the 'Physical metallurgy of reactor fuel elements', organized by the Central Electricity Generating Board, Berkeley Nuclear Laboratories, and held at Berkeley Castle and Berkeley Nuclear Laboratories, Gloucestershire, on 2-7 September 1973. London, Metals Society.
|
Harris, J. S. (1973). Fatigue and failure of polymers under static and dynamic loading conditions, Leeds.
|
Harris, N. K., N. K. Payne, et al. (1988). Gas detection using semiconducting polymers. Manchester, UMIST.
|
Harrison David, B. (1990). Preparation of polymers by aqueous ring opening metathesis polymerisation, and their application to industrial water treatment processes, University of Durham.
|
Harrison Ian, M. (1997). The competitive adsorption of polymers and surfactants at the silica-water interface, University of Salford.
|
Harrison Mark, G. (1994). The charge excitations of conjugated polymers and oligomers: optical and electrical studies within field-effect devices, University of Cambridge.
|
Harrison, A. (1981). A theoretical and experimental model system investigation of core ionisation phenomena for polymers, University of Durham.
|
Harrison, A. W. (2002). High strain rate superplasticity of aluminium-magnesium alloys: [249] leaves.
|
Harrison, I. W. (1989). Development of a knowledge-based system for open stope mine design.
|
Harrison, J. P. (1993). Improved analysis of rock mass geometry using mathematical and photogrammetric methods.
|
Harrison, P. L., I. Welding, et al. (1988). An investigation into the cause of low fracture toughness in molybdenum bearing cellulosic weld metals. London, H.M.S.O.
|
