Gomes, M. P. d. S. F. (1989). Cutting and laying up of preimpregnated composite materials.
|
Gomez, I. L. (1990). High nitrile polymers for beverage container applications. Lancaster, Pa., Technomic Pub. Co.
|
Gooding, D. J. (1999). Organic magnetic polymers, Leeds.
|
Goodman, I. (1967). Synthetic fibre-forming polymers. London, R.I.C.
|
Goodman, I. (1968). Synthetic fibre-forming polymers. London, Royal Institute of Chemistry.
|
Goodman, I. and C. Royal Institute of (1967). Synthetic fibre-forming polymers. London, Royal Institute of Chemistry.
|
Goodman, I. and C. Royal Institute of (1968). Synthetic fibre-forming polymers. London, Royal Institute of Chemistry.
|
Goodman, I. P. H. D. (1968). Synthetic fibre-forming polymers. London, Royal Institute of Chemistry.
|
Goodman, I., J. A. Rhys, et al. (1965). Polyesters. London, Iliffe published for the Plastics Institute.
|
Goodman, J. W., M. American Society of Mechanical Engineers. Winter, et al. (1981). Advanced aluminium and titanium structures: presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Washington, D.C., November 15-20, 1981. New York, American Society of Mechanical Engineers.
|
Goodstein, M. P. (2004). Plastics and polymers science fair projects: using hair gel, soda bottles, and slimy stuff. Berkeley Heights, NJ, Enslow Publishers.
|
Goodwin Neil, J. (1998). Towards organic ferromagnets via high-spin polyradicals: the synthesis of azo functionalised polymers, University of Lancaster.
|
Goodwin, J. W. (2004). Colloids and interfaces with surfactants and polymers: an introduction. Chichester, England; Hoboken, NJ, J. Wiley.
|
Goonetilleka, M. D. R. J. and B. University of Aston in (1988). Migration of additives from thermoplastic polymers. Birmingham, University of Aston.
|
Goosens, J. G. P. (1998). Processing of tractable polymers using reactive solvents. Eindhoven, University of Eindhoven.
|
Goosey, M. T. and L. Rapra Technology (2000). Electronics applications of polymers II, Rapra Technology Limited.
|
Gordon, G. i. I. A. (1964). Stabilization of synthetic high polymers. Jerusalem, Israel Program for Scientific Translations.
|
Gordon, M. (1957). The structure and physical properties of high polymers. London, Plastics Institute.
|
Gordon, M. (1963). High Polymers. Structure and physical properties. (Second edition.) [With plates.]. London, Iliffe Books.
|
Gordon, M. and I. Plastics (1963). High polymers: structure and physical properties. London, published for the Plastics Institute by Iliffe.
|
Gordon, M., N. A. f. Plate, et al. (1984). Liquid crystal polymers I. Berlin; New York, Springer-Verlag.
|
Gordon, M., N. A. f. Plate, et al. (1984). Liquid crystal polymers II/III. Berlin; New York, Springer-Verlag.
|
Goring, D., E. International Conference on Polymers in a Marine, et al. (1989). Polymers in a marine environment: [proceedings of the] 2nd International Conference, London, 14-16 October 1987. London, The Institute of Marine Engineers.
|
Goshawk, J. A., R. S. Jones, et al., Eds. (1998). Selected papers presented at the fourth international conference on flow processes in composite materials, Aberystwyth, UK, on 9-11 September 1996.
|
Goswami, B. C. (1976). The molecular reorientation in deformation bands in oriented polymers and the yield behaviour of isotropic polycarbonate, Leeds.
|
Gottweis, J., Z. Palicka, et al. (1969). Indene, its polymers and copolymers. (Translation. Zdenek Palicka.). Statni pedagogicke nakladatelstvi, v Praze.
|
Gough, J. (2000). Stress-strain behaviour of rubber.
|
Gould, P. J. (1991). The high temperature oxidation of chromium and chromium implanted with cerium.
|
Goulette, M. J., J. D. Dominy, et al. (1995). Application of composite materials in aero gas turbines, Rolls-Royce plc.
|
Goutianos, S. (2004). Micromechanics of compressive failure in carbon-fibre polymer composites: 302 leaves.
|
Gower, M. R. L., G. D. Sims, et al. (2002). Project MMS2 report no. 1: towards a standard qualification plan (SQP) for composite materials. Teddington, National Physical Laboratory.
|
Gower, M. R. L., G. D. Sims, et al. (2003). Project MMS2 report no. 3: towards a Standard Qualification Plan (SQP) for composite materials. Teddington, National Physical Laboratory.
|
Gower, M. R. L., G. D. Sims, et al. (2003). Towards a Standard Qualification Plan (SQP) for composite materials: current status of material property databases.
|
Gower, M., G. Sims, et al. (2003). Fibre-reinforced plastic composites: qualification of composite materials.
|
Gowripalan, N. (1987). Reinforcement of concrete elements with modified polymers, Leeds.
|
Grachvogel David, A. (2000). The synthesis and structural characterisation of the lanthanide and transition metal coordination polymers formed with novel multinucleating ligands, University of London.
|
Grachvogel, D. A. (2000). The synthesis and structural characterisation of the lanthanide and transition metal coordination polymers formed with novel multidentate ligands.
|
Grafflin Mildred, W., M. Spurlin Harold, et al. (1954). Cellulose and Cellulose Derivatives. Second completely revised and augmented edition [of the work edited by E. Ott], etc. (Edited by E. Ott and H. M. Spurlin, coeditors; Mildred W. Grafflin, assistant editor.). New York, Interscience Publishers.
|
Graham, C. D. and S. Chikazumi (1997). Physics of ferromagnetism. Oxford, Clarendon Press.
|
Gramckow, U. (1995). Geological controls on wellbore stability.
|
