Glad, B. and u. Umeå (1994). Reactive composite membranes for analytical chemistry: synthesis, functionalization and characterization of novel interpenetrating polymer network type materials. Umea, Sweden, Akademisk Avhandling.
|
Glass, J. E. (2000). Associate polymers in aqueous media. Washington, D.C., American Chemical Society.
|
Glass, J. E. and American Chemical Society. Division of Polymeric Materials: Science and Engineering. (1989). Polymers in aqueous media: performance through association. Washington, DC, American Chemical Society.
|
Glass, J. E. and E. American Chemical Society Division of Polymeric Materials Science and, Eds. (1986). Water soluble polymers: Symposium: 188th Meeting: Papers, American Chemical Society.
|
Glass, J. E. and E. American Chemical Society Division of Polymeric Materials: Science and (1989). Polymers in aqueous media: performance through association: Symposium: 194th National meeting: Papers. Washington, DC, American Chemical Society.
|
Glass, J. E. and S. American Chemical (2000). Associative polymers in aqueous media. Washington, D.C., American Chemical Society.
|
Glass, J. E., American Chemical Society. Division of Polymeric Materials: Science and Engineering., et al. (1986). Water-soluble polymers: beauty with performance. Washington, DC, American Chemical Society.
|
Glass, J. E., American Chemical Society. Division of Polymeric Materials: Science and Engineering., et al. (1996). Hydrophilic polymers: performance with environmental acceptance. Washington, DC, American Chemical Society.
|
Glass, J. E., G. Swift, et al. (1990). Agricultural and synthetic polymers: biodegradability and utilization: Symposium: 197th National meeting: Papers. Washington, D.C., American Chemical Society.
|
Glass, J. E., G. Swift, et al. (1990). Agricultural and synthetic polymers: biodegradability and utilization. Washington, D.C., American Chemical Society.
|
Glass, J. E., S. a. E. American Chemical Society. Division of Polymeric Materials, et al. (1995). Hydrophilic polymers: performance with environmental acceptance. Washington, D.C., American Chemical Society.
|
Gledstone, C., W. Hesketh, et al. (1982). Materials handling: the systems approach. London, H.M.S.O.
|
Glegg, G. L. (1983). A design engineer's pocket book. London, Macmillan.
|
Glossop Neil David, W. and T. University of (1989). An embedded fibre optic sensor for impact damage detection in composite materials. Canadian theses = Thèses Canadiennes. Toronto, University of Toronto.
|
Glotin, M. (1978). The structure of crystalline polymers crystallized from the melt in rapid cooling conditions, Original typescript.
|
Glyde, B. and C. Rapra Technology Limited. Business Development (1990). Polymers for packaging: tomorrows choices. Shrewsbury, Rapra Business Development Consultancy.
|
Goddard, E. D. and K. P. Ananthapadmanabhan (1993). Interactions of surfactants with polymers and proteins. Boca Raton, CRC Press.
|
Goddard, E. D. and P. Ananthapadmanabhan Kavssery (1992). Interactions of surfactants with polymers and proteins. Boca Raton, CRC Press.
|
Goddard, N. D. R. (1988). Microstructural influence on fatigue in two alpha plus beta titanium alloys.
|
Goddy, B. (1990). Electrokinetic concentration of aqueous dispersions of metal oxide particles.
|
Godfrey, T. M. T. (2001). Production, microstructure and tensile properties of mechanically milled titanium-boron alloys.
|
Godovski*i, I. U. K. (1992). Thermophysical properties of polymers. Berlin; New York, Springer-Verlag.
|
Godovskii, I. K. (1989). Speciality polymers/polymer physics. Berlin; London, Springer-Verlag.
|
Godovsky Yu, K. (1989). Speciality polymers/polymer physics. Berlin, Springer-Verlag.
|
Goethals, E. J. (1989). Telechelic polymers: synthesis and applications. Boca Raton, Fla., CRC Press.
|
Goethals, E. J., D. A. Nole, et al. (1977). Sulfur-containing polymers. Stuttgart, Thieme.
|
Goethals, E. J., V. Moss, et al. (1977). Sulfur-containing polymers. Stuttgart, Thieme.
|
Goh Kheng, L. (2001). Fibre reinforcement in fibre composite materials: effect of fibre shape, University of Aberdeen.
|
Gökay, M. K. (1993). Developing computer methodologies for rock engineering decisions.
|
Goldberg Allan, B. and E. Society for the Advancement of Material and Process, Eds. (2002). 2002 M&P: ideas to reality.
|
Goldberg Eugene, P. (1983). Targeted drugs. New York; Chichester, Wiley.
|
Goldberg Eugene, P., Ed. (1980). Biomedical polymers. New York, Academic Press.
|
Goldberg, E. P. (1983). Targeted drugs. New York, J. Wiley.
|
Goldberg, E. P. and A. Nakajima (1980). Biomedical polymers: polymeric materials and pharmaceuticals for biomedical use. New York, Academic Press.
|
Goldberg, E. P., A. Nakajima, et al. (1980). Biomedical polymers: polymeric materials and pharmaceuticals for biomedical use: proceedings from the Symposium on Polymeric Materials and Pharmaceuticals for Biomedical Use presented April 4-6, 1979 at the First Joint Congress of the American Chemical Society and the Chemical Society of Japan in Honolulu, Hawaii. New York; London, Academic Press.
|
Goldfarb, I. J. and R. McGuchan (1968). Thermal degradation of polyesters. 1. Aliphatic polymers, Afml.
|
Golding, B. (1959). Polymers and resins: their chemistry and chemical engineering. Princeton, N.J., Van Nostrand.
|
Gol'dman, A. I. A., M. Shelef, et al. (1994). Prediction of the deformation properties of polymeric and composite materials. Washington, DC, American Chemical Society.
|
Goldrein Howell, T. (1996). Applications of optical strain-measurement techniques to composite materials, University of Cambridge.
|
Goldstone, B. M. and E. Building Research (1982). Hazards from the concentration of solar radiation by textured window glass. London, Dept. of the Environment, Building Research Establishment: H.M.S.O.
|
