Georgaki, I. (2004). Characterisation of iron-rich sludge for densification and iron recycling: 243 leaves.
|
Georgia Institute of Technology School of Materials Science and, E. and C. Institute for Interconnecting and Packaging Electronic (1996). International conference on electronic assembly: material and process challenges. Northbrook, IL, IPC.
|
Georgiou, I. (2003). The fracture of adhesively-bonded aluminium joints for automotive structures: 332 leaves.
|
Gerard, J.-F., Ed. (2001). Fillers and filled polymers, Wiley-VCH.
|
Gerdeen, J. C., H. W. Lord, et al. (2005). Mechanical design with polymers and composites. Boca Raton, FL, Taylor & Francis.
|
Gerginov, B. B. (1989). Investigations into continuous extrusion.
|
Gerhard-Multhaupt, R. and E. P. S. M. P. Section, Eds. (1999). Molecular orientation in polymers: generation, characterisation, application, European Physical Society.
|
Gerharz, J. J. and D. Schutz (1980). Literature research on the mechanical properties of fibre composite materials: analysis of the state of the art Schrifttumsrecherche zum Festigkeitsverhalten von Faserverbundwerkstoffen, Analyse des Standes der Technik. Farnborough, Royal Aircraft Establishment.
|
German, M. J. (1999). The mechanical characterisation of a novel biometic hydrogel polymer.
|
Geuskens, G. (1975). Degradation and stabilisation of polymers. London, Applied Science Publishers.
|
Ghafoori, N., A. M. E. Division, et al., Eds. (1993). Utilization of industrial by-products for construction materials: Session: National convention: Papers. New York, American Society of Civil Engineers.
|
Ghafoori, N., American Society of Civil Engineers. Materials Engineering Division., et al. (1993). Innovation in repair techniques of concrete structures: proceedings of a session sponsored by the Materials Engineering Division in conjunction with the ASCE National Convention, Dallas, Texas, October 24-28, 1993. New York, American Society of Civil Engineers.
|
Ghafoori, N., American Society of Civil Engineers. Materials Engineering Division., et al. (1993). Utilization of industrial by-products for construction materials: proceedings of the session sponsored by the Materials Engineering Division in conjunction with the ASCE National Convention in Dallas, Texas, October 24-28, 1993. New York, American Society of Civil Engineers.
|
Ghafoori, N., D. American Society of Civil Engineers Materials Enginering, et al., Eds. (1993). Innovation in repair techniques of concrete structures: Session: National convention: Papers. Washington DC, American Society of Civil Engineers.
|
Ghiggino, K. P. and T. A. Smith (1993). Dynamics of energy migration and trappings in photoirradiated polymers. Oxford, Pergamon.
|
Ghosh, S. K. and T. Institute for Industrial Technology, Eds. (1989). Advanced materials: composite, ceramic, polymer: Conference: Papers. Technology transfer series. Gournay-sur-Marne, IITT-International.
|
Ghosh, S. K., Composites, et al., Eds. (1990). Advanced Materials: Composite-Ceramic-Polymer =Les matériaux avancés. Technology transfer series. Gournay-sur-Marne, IITT International.
|
Ghosh, S. K., T. Institute for Industrial Technology, et al. (1989). Advanced materials: composite, ceramic, polymer = les matériaux avancés. I.I.T.T. International, Gournay sur Marne, France, IITT-International.
|
Giacco, A. F. (2003). Maverick management: strategies for success. Newark, University of Delaware Press.
|
Giarrusso, A., G. Ricci, et al. (2004). Stereospecific polymerization and stereoregular polymers: Milan, Italy, June 8-12 2003. Weinheim, Wiley.
|
Gibson Ronald, F., T.-W. Chou, et al., Eds. (1995). Innovative processing and characterization of composite materials: Symposium: International mechanical engineering congress: Papers. ASME Noise Control and Acoustics Division -publications- NCA; vol 20, ASME.
|
Gibson, A. G. and f. Composites in (2003). Response of composite materials to fire. Newcastle upon Tyne, Composite Link.
|
Gibson, A. G. and F. International Conference on Composites in (1999). Proceedings of the 1st International Conference on Composites in Fire: 15-16 September 1999, Centre for Composite Materials Engineering, University of Newcastle, UK. Cambridge, Woodhead Pub.
|
Gibson, A. G., F. International Conference on Composites in, et al. (2001). Composites in Fire 2: 12-13 September 2001, Centre for Composite Materials Engineering, University of Newcastle, UK. Newcastle upon Tyne, Conference Design Consultants.
|
Gibson, A. G., F. International Conference on Composites in, et al. (2001). Proceedings of the 2nd International Conference on Composites in Fire: 12-13 September 2001, Centre for Composite Materials Engineering, University of Newcastle, UK. Newcastle upon Tyne, Conference Design Consultants.
|
Gibson, A. G., Frc, et al. (2000). FRC 2000: proceedings of the 8th International Conference on Fibre Reinforced Composites: Centre for Composite Materials Engineering, University of Newcastle, UK, 13-15 September 2000. Cambridge, Woodhead.
|
Gibson, G. (2000). A probe of structural defects in YBCO thin films using XRD and raman microscopy.
|
Gibson, R. F., T.-W. Chou, et al. (1995). Innovative processing and characterization of composite materials: presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California. New York, N.Y., American Society of Mechanical Engineers.
|
Gilbert, D. G. and C. University of (1985). Fracture and deformation of amorphous polymers, University of Cambridge.
|
Gilchrist, P. (2001). The production of uranium metal or alloys using non-aqueous media.
|
Gill, R. M. (1972). Carbon fibres in composite materials. London, Iliffe Books for the Plastics Institute.
|
Gill, W. D. (1983). Electrically conducting polymers, IBM.
|
Gillam, J. E. (1980). A study of transfer film formation and wear debris character in the wear of polymers, Leeds.
|
Gillson, R. K. (1996). The brittle fracture of some tough polymers, Leeds.
|
Gilmour Robin, A. A. (1998). The synthesis, characterisation and application of conjugated imine conducting ladder polymers in rechargeable lithium cells, University of Reading.
|
Gilmour, I. W. (1977). The thermoelastic effect in glassy polymers. Birmingham, University of Birmingham.
|
Giltrow, J. P. and J. K. Lancaster (1967). Carbon fibre reinforced polymers as self-lubricating materials, Farnborough.
|
Gimeno, M. and D. University of (2002). Synthesis and characterisation of potentially electrostrictive polymers.
|
Giniewicz Jayne, R. (1985). (Pb, Bi)(Ti, Fe)O3/Polymer 0-3 composite materials for hydrophone applications, Pennsylvania State University.
|
Gkourmpis, T. and R. University of (2003). Extraction of structural parameters from neutron scattering data of amorphous polymers and their miscible blends. Reading, University of Reading.
|
