Ellis, J. D. (1993). Quality assurance by EBBM.
|
Ellis, T. S., R. H. Still, et al. (1977). Thermal degradation of some N-substituted aminostyrene polymers. Manchester, UMIST.
|
Ellis, W. J. (1968). Engineering materials for technicians. London, Hutchinson Educational.
|
Ellul, I. R. (1989). The prediction of dispersed gas-liquid flow in complex pipe geometries.
|
Elmgren, M. (1993). Amperometric biosensors based on enzymes wired by redox polymers, Acta Universitatis Upsaliensis.
|
Elomaa, M. (1989). Pyrolysis and combustion studies of polymers by gas chromatography and thermal analysis/ Matti Elomaa. Helsinki, University of Helsinki.
|
Elomaa, M. and T. Suomen (1991). Pyrolysis and combustion studies of polymers by gas chromatography and thermal analysis. Helsinki, Societas Scientiarum Fennica.
|
Elton David, J. and C. Vipulanandan (1998). Recycled materials in geotechnical applications. Reston, VA, American Society of Civil Engineers.
|
Embleton Jonathan, K. (1991). Microencapsulation studies with P(HB-HV) polymers, University of Aston in Birmingham.
|
Emerson John, A., M. Torkelson John, et al. (1991). Optical and electrical properties of polymers: Symposium: Selected papers. Pittsburgh, Pa., Materials Research Society.
|
Emerson, J. A. and J. M. Torkelson (1991). Optical and electrical properties of polymers: symposium held November 26-28, 1990, Boston, Massachusetts, U.S.A. Pittsburgh, Pa., Materials Research Society.
|
Emerson, P. J., G. Oates, et al., Eds. (1986). NDT-85: proceedings of the 20th Annual British Conference on Non-Destructive Testing held at Erskine, Strathclyde, Scotland, 17-19 September 1985. Warley, West Midlands, Engineering Materials Advisory Services Ltd.: The British Institute of Non-Destructive Testing.
|
Emsley Richard John, P. (1991). The synthesis of preceramic polymers for silicon carbide fibres, University of Sheffield.
|
Emsley, R. J. P. (1992). The synthesis of preceramic polymers for silicon carbide fibres.
|
Emslie, C. (1989). An investigation into the production of low-loss optical fibres from organic polymers, Original typescript.
|
Engineering and Physical Sciences Research Council. Built Environment, P. (1996). Built Environment Programme. [Swindon], Engineering and Physical Sciences Research Council.
|
Engineering and Physical Sciences Research Council. Materials, P. (2001). Materials: newsletter of the Materials Programme of the EPSRC. Swindon, [Engineering and Physical Sciences Research Council].
|
Engineering Equipment and Materials Users, A. (1987). 90/10 Copper nickel alloy piping for offshore applications: specification: flanges, composite and solid. London, EEMUA.
|
Engineering Equipment and Materials Users, A. (1987). 90/10 copper nickel alloy piping for offshore applications. London, EEMUA.
|
EngineeringDivision, A. O. M. a. A. (1992). Offshore mechanics and arctic engineering: 11th International conference: Papers, ASME.
|
England (1958). Safeguarding of Industries Act, 1921. K.I.D. Abitration Polymers. Transcript of main hearing, etc, London.
|
Englewood Cliffs, N.J., Society for Experimental Stress Analysis;
|
Enikolopyan, N. S. (1990). Filled polymers I: science and technology. Berlin; London, Springer-Verlag.
|
Enikolopyan, N. S., Ed. (1990). Filled polymers I, Springer-Verlag.
|
Enobakhare, B. O. (1998). In vitro evaluation of chondrocyte/alginate constructs for tissue engineered articular cartilage.
|
Enwere, M. c. P. (1991). Evaluation of NMR and MRI techniques for use in special core analysis.
|
Epacher, E., J. Varga, et al., Eds. (2001). Morphology and properties of crystalline polymers, EPS.
|
Epstein, A. J. and T. Ishiguro, Eds. (1994). Metallic phase of conducting polymers: Workshop: Selected papers, Elsevier.
|
Epstein, A. J., T. Ishiguro, et al. (1994). Papers selected from the Workshop on the Metallic Phase of Conducting Polymers, Columbus, OH, USA, November 4-5, 1993. Lausanne, Elsevier Sequoia.
|
Epton, R. (1979). Synthesis, properties and chemical applications of some new speciality polymers. Birmingham, University of Birmingham.
|
Epton, R. and Chemical Society (Great Britain) (1978). Chromatography of synthetic and biological polymers. Chichester, Eng. New York, Published for the Chemical Society
|
Erath Markus, A. and E. Society for the Advancement of Material and Process, Eds. (1997). Technology and material needs for the year 2000: Proceedings of the 18th international SAMPE europe conference of the Society for the Advancement of Material and Process Engineering, Sampe Europe.
|
Erath Markus, A. and Sampe, Eds. (1999). Advanced materials and processes: affordabilities for the new age, SAMPE.
|
Erath Markus, A., U. Meier, et al., Eds. (1996). Success of materials by combination: proceedings of the 17th international SAMPE Europe conference of the Society for the Advancement of Material and Process Engineering. Niederglatt, SAMPE Europe.
|
Erath, M. and S. Europe, Eds. (1998). Progress through innovation and cost effectiveness. Niederglatt, SAMPE Europe.
|
Eric Greene Associates. (1999). Marine composites. Annapolis, Md., Eric Greene Associates.
|
Ericksen, J. and A. University of Minnesota. Institute for Mathematics and Its (1984). Orienting polymers: proceedings of a workshop held at the IMA, University of Minnesota, Minneapolis, March 21-26, 1983. Berlin; New York, Springer-Verlag.
|
Ericksen, J. L. and A. University of Minnesota. Institute for Mathematics and Its (1984). Orienting polymers: proceedings of a workshop held at the IMA, University of Minnesota, Minneapolis, March 21-26, 1983. Berlin; New York, Springer-Verlag.
|
Ericksen, J. L. and University of Minnesota. Institute for Mathematics and Its Applications. (1984). Orienting polymers: proceedings of a workshop held at the IMA, University of Minnesota, Minneapolis, March 21-26, 1983. Berlin; New York, Springer-Verlag.
|
Ericksen, J. L., P. Workshop on Orienting, et al. (1984). Orienting polymers: proceedings of a workshop held at the IMA, University of Minnesota, Minneapolis. 1983.
|
