Doyama, M. and E. International Conference and Exhibition on Computer Applications to Materials Science and (1993). Computer aided innovation of new materials II: proceedings of the second International Conference and Exhibition on Computer Applications to Materials and Molecular Science and Engineering - CAMSE '92. Yokohama, Japan. 1992. Amsterdam, North-Holland.
|
Doyama, M., Ed. (1991). Computer aided innovation of new materials: 1st International conference on computer applications to materials science and engineering: Papers, North-Holland.
|
Doyama, M., Ed. (1993). Computer aided innovation of new materials: 2nd International conference on computer applications to materials and molecular science and engineering: Papers, North-Holland.
|
Doyama, M., S. Somiya, et al. (1989). Ionic polymers/ordered polymers for high performance materials/biomaterials: Session: 1st International meeting on advanced materials: Papers. Pittsburgh, PA, Materials Research Society.
|
Doyle, F. M., C. a. S. C. Topical Symposium on Innovations in Materials Processing Using Aqueous, et al. (1988). Innovations in materials processing using aqueous, colloid & surface chemistry: proceedings of a Topical Symposium on Innovations in Materials Processing Using Aqueous, Colloid and surface Chemistry, sponsored by the TMS/SME Hydrometallurgy and Chemical Processing Committee, held at the 1989 TMS Annual Meeting in Las Vegas, Nevada, February 27-March 3,1989. Warrendale, TMS.
|
Doyle, S. E. J. and S. University of (1985). The physical characteristics and dielectric behaviour of cellulose acetate polymers. Glasgow, University of Strathclyde.
|
Drake, R. C. (1986). Time resolved fluorescence of synthetic polymers: 300 leaves.
|
Drew Robin, A. L., H. Mostaghaci, et al., Eds. (1993). Developments and applications of ceramics and new metal alloys: International symposium: 32nd annual conference: Papers. Montreal, Canadian Institute of Mining, Metallurgy and Petroleum.
|
Drew, R. C. (1988). An investigation into damage initiation and propagation in carbon fibre reinforced plastics, Original typescript.
|
Drissi-Habti, M. and A. Groupe d'Etude et de Recherche sur les Matériaux, Eds. (2000). Composite materials for aeronautical and aerospace applications = Matériaux composites pour applications aéronautiques et aérospatiales, Elsevier.
|
Drobny, J. G. (2002). Radiation technology for polymers. Boca Raton, Fla.; London, CRC.
|
Drobny, J. G. (2003). Radiation technology for polymers. Boca Raton, Fla., CRC Press.
|
Dronsfield, A. T., R. N. Haszeldine, et al. (1969). Polymers containing phosphorus and nitrogen. Manchester, UMIST.
|
Drosos, P. (1985). Compression fatigue behaviour of a undirectional glass-fibre lamina in the presence of imbedded delaminations, Original typescript.
|
Drummond Charles, H., U. Ohio State, et al., Eds. (1993). Glass problems: 53rd Conference: Papers, American Ceramic Society.
|
D'Souza, N. A., P. V. Shibaev, et al., Eds. (1997). International forum on polymers: 1996, SPE.
|
D'Souza, N. S. (1998). Texture evolution and microsegregation during directional and single crystal solidification of the nickel based super alloy, CMSX 4.
|
Du, Y. (1996). Synthesis of ceramic powders by a molten salt method.
|
Duan, J. (2002). Computer modelling of diffusion mechanisms in the ordered alloy Ni3Al. Liverpool, Thesis Ph.D.
|
Dubois, P., P. Degée, et al. (2000). Recent advances in ring opening (metathesis) polymerization: RO(M)P'99, held in Mons, Belgium, April 12-15, 1999, organized by Laboratory of Polymeric and Composite Materials, University of Mons-Hainaut, under the auspices of European Polymer Federation EDF. Weinheim, Wiley-VCH Verlag.
|
Ducharme, S., P. M. Borsenberger, et al. (1995). Xerographic photoreceptors and photorefractive polymers: 10-11 July 1995, San Diego, California. Bellingham, Washington, SPIE.
|
Duer, R. H. (1997). The effect of residual stresses on the toughness of adhesive joints.
|
Dufour, A.-L. (2002). Novel superbases in the synthesis of branched polymers and copolymers.
|
Dufour, A.-L. A. (2002). Novel superbases in the sythesis of branched polymers and copolymers: 234 leaves.
|
Dufton, P. W. and G. Rapra Technology Limited. Industry Analysis and Publishing (1997). Polymers in building and construction: materials in use and developments in markets: a report from Rapra's Industry Analysis and Publishing Group. Shrewsbury, Rapra Technology.
|
Dufton, P. W. and L. Rapra Technology (1995). Recent developments in polymers for wire and cable: an industry report. Shawbury, RAPRA Technology.
|
Dufton, P. W. and Rapra Technology Limited. Industry Analysis and Business Publishing Group. (1997). Polymers in building & construction: materials in use and developments in markets: a report from Rapra's Industry Analysis and Publishing Group. Shrewsbury, UK, Rapra Technology Ltd.
|
Duke Thomas Anthony, J. (1989). The dynamics of polymers at interfaces and in electric fields, University of Cambridge.
|
Duke, A. J. (1998). An investigation of the properties of novel, poly(pyrrole)-based conducting polymers, Original typescript.
|
Dumitriu, S. (2002). Polymeric biomaterials. New York, Marcel Dekker, Inc.
|
Duncan David, M. (1997). Synthesis and characterisation of chiral side chain liquid crystal polymers, Heriot-Watt University.
|
Duncan, B. C., A. Pearce, et al. (1999). Comparison of impact and high rate tests for determining properties of adhesives and polymers needed for design under impact loading: Performance of Adhesives Joints Programme Project PAJ2, National Physical Laboratory.Great Britain, Centre for Materials Measurement and Technology.
|
Duncan, B. C., A. Pearce, et al. (1999). Comparison of impact and high rate tests for determining properties of adhesives and polymers needed for design under impact loading. Teddington, NPL.
|
Dunford, D. V. (1994). Development of diffusion bonding techniques and testing of bonded joints in AL-Li 8090 alloy.
|
Dunne, C. A. (2001). Investigations on the accelerated synthesis of molecularly imprinted polymers using functionalised surfaces.
|
Dunne, C. A. and L. University of (2002). Investigations on the accelerated synthesis of molecularly imprinted polymers using functionalised surfaces.
|
Dunstan, S. P. (1993). Octree solid modelling applications in geology and open pit design.
|
Dupée, J. D. (1998). On-line crystallinity and temperature measurements of nylon 6,6 using a remote laser Raman probe.
|
Dusek, K. (1984). Polymers in medicine, Springer.
|
Dusek, K. and J. Drobník (1984). Polymers in medicine. Berlin; New York, Springer-Verlag.
|
