Dhingra Ashok, K., R. B. Pipes, et al. (1982). New composite materials and technology. New York, N.Y., American Institute of Chemical Engineers.
|
Dhingra, A. K. and R. B. Pipes (1982). New composite materials and technology. New York, N.Y., American Institute of Chemical Engineers.
|
Dhingra, A. K. and T. Chandra, Eds. (1993). Advanced composites '93: International conference on advanced composite materials: Papers, TMS.
|
Dhir, R. K., K. A. Paine, et al. (2002). Composite materials in concrete construction: proceedings of the international seminar held at the University of Dundee, Scotland, UK on 5-6 September, 2002. London, Thomas Telford.
|
Di Benedetto, A. T., L. Nicolais, et al. (1992). Composite materials: proceedings of Symposium A4 on Composite Materials of the International Conference on Advanced Materials - ICAM 91, Strasbourg, France. 1991. Amsterdam, North-Holland.
|
Di Sciuva, M., L. Librescu, et al., Eds. (2001). Recent developments in the modeling and behavior of composite materials structures, Elsevier.
|
Diab, M. M. E.-H. (1981). The wear of polymers including polyimide journal bearings and the influence of counterface topography under lubricated and dry sliding conditions, Leeds.
|
Diamond, R. J. and S. University of (1988). Labelled polymers: Synthesis, analysis and degradation studies. Guildford, University of Surrey.
|
DiBenedetto, A. T., L. Nicolais, et al. (1992). Composite materials: proceedings of Symposium A4 on Composite Materials of the International Conference on Advanced Materials--ICAM 91, Strasbourg, France, 27-29 May, 1991. Amsterdam; New York; North-Holland;
|
DiBenedetto, A. T., L. Nicolais, et al. (1992). Composite materials: Symposium A4: International conference on advanced materials: Papers. Amsterdam; New York; New York, N.Y., U.S.A., North-Holland: Elsevier Science Pub. Co. [distributor].
|
Dick John, S. (1987). Compounding materials for the polymer industries: a concise guide to polymers, rubbers, adhesives, coatings. Park Ridge, N.J., Noyes Publications.
|
Dick, J. S. (1987). Compounding materials for the polymer industries: a concise guide to polymers, rubbers, adhesives, and coatings. Park Ridge, N.J., U.S.A., Noyes Publications.
|
Dickens, P. M. and B. University of Aston in (1984). The sliding wear of polymers under various fluids. Birmingham, University of Aston.
|
Dickenson, R. P., G. University of, et al. (1993). Advanced composite materials in Russia: report of the 1992 mission to Russia under the OSTEMS scheme of the DTI. [London], University of Greenwich.
|
Dickie Ray, A., S. S. Labana, et al. (1988). Cross-linked polymers: chemistry, properties, and applications: Symposium: 193rd Meeting: Papers. Washington, DC, American Chemical Society.
|
Dickie, R. A., S. S. Labana, et al. (1988). Cross-linked polymers: chemistry, properties, and applications. Washington, DC, American Chemical Society.
|
Dickinson, E. and C. Royal Society of (1991). Food polymers, gels and colloids: based on the proceedings of an international symposium organised by the Food Chemistry Group of the Royal Society of Chemistry at Norwich from 28th-30th March 1990. Cambridge, Royal Society of Chemistry.
|
Dickinson, E. and G. Royal Society of Chemistry Food Chemistry (1991). Food polymers, gels and colloids: based on the proceedings of an international symposium organized by the Food Chemistry Group of the Royal Society of Chemistry at Norwich. 1990.
|
Dickinson, E. and G. Royal Society of Chemistry Food Chemistry (1991). Food polymers, gels and colloids: International symposium: Papers, Royal Society of Chemistry.
|
Dickinson, E., P. Walstra, et al. (1993). Food colloids and polymers: stability and mechanical properties, [the proceedinsg of a conference organised jointly by the Food Chemistry Group of the Royal Society of Chemistry and the Netherlands Society for Nutrition and Food Science, held at Lunteren, The Netherlands on 8-10 April 1992]. Cambridge, Royal Society of Chemistry.
|
Dickinson, E., P. Walstra, et al. (1993). Food colloids and polymers: stability and mechanical properties: International symposium: Papers, Royal Society of Chemistry.
|
Dickinson, E., P. Walstra, et al. (1993). Food colloids and polymers: stability and mechanical properties. Cambridge, Royal Society of Chemistry.
|
Dickson, R. F. and B. University of (1984). Environmental fatigue of composite materials, University of Bath.
|
Dicus Dennis, L., Ed. (1996). Modified composite materials workshop, [np].
|
Dicus Dennis, L., W. Modified Composite Materials, et al. (1978). Modified Composite Materials Workshop, held at Langley Research Center, Hampton, Virginia, March 23-24, 1978. Hampton, Va, Langley Research Center.
|
Dietz, A. G. H. (1965). Composite materials. Philadelphia, American Society for Testing and Materials.
|
Dijon, G. (2002). A study of the structure and the mechanical properties of flax as a reinforcing fibre for composites: 247 leaves.
|
Dikeou James, T., W. Fowler David, et al., Eds. (1985). Polymer concrete: uses, materials, and properties: Symposium on polymers in concrete: Fall convention: Papers, American Concrete Institute.
|
Diller, K. R., T. International Center for Heat and Mass, et al. (1998). Biotransport: heat and mass transfer in living systems. New York, N.Y., New York Academy of Sciences.
|
Dillon, M. J. (1979). The deformation and fracture of ABS polymers.
|
Dimitriades, K. (1997). Characterisation, processing and mechanical modelling of a thermoptic.
|
Ding, R. (2002). Predictive modelling of microstructural evolution and plastic flow of polycrystalline materials during thermomechanical processing: 226 leaves.
|
Diogo, A. C., R. British Society of, et al., Eds. (1990). Molecular structure and rheology of polymers: 1st Joint British Spanish Portuguese rheology: Meeting: Papers, Sociedade Portuguesa de Hemorreologia.
|
Dioh, N. N. (1993). High strain rate behaviour of polymers at various temperatures.
|
Dissado, L. A. and J. C. Fothergill (1992). Electrical degradation and breakdown in polymers. London, P. Peregrinus.
|
Dissado, L. A., J. C. Fothergill, et al. (1992). Electrical degradation and breakdown in polymers. London, Peregrinus on behalf of the Institution of Electrical Engineers.
|
Division, A. M. (1992). Cellular polymers: Symposium: Winter annual meeting: Papers, ASME.
|
Division, A. M. (1992). Processing, fabrication, and manufacturing of composite materials: Symposium entitled "Processing and manufacturing of composite materials II": Winter annual meeting: Papers, ASME.
|
Division, A. M. and e. Mechanical (2004). Composite materials 2004.
|
Division, I. M. (1992). Recycling of polymers: science and technology: International symposium: Papers, Huthig and Wepf Verlag.
|
