Dean, G. D. and A. National Physical Laboratory. Division of Materials (1985). Interim report on standard procedures for the presentation of multipoint data on polymers. Teddington, National Physical Laboratory Division of Materials Applications.
|
Dean, G. D. and A. National Physical Laboratory. Division of Materials (1985). The application of acoustic surface waves to the characterisation of polymers. Teddington, National Physical Laboratory Division of Materials Applications.
|
Dean, G. D. and A. National Physical Laboratory. Division of Materials (1988). The use of plate bending waves for elastic property determination of polymers. Teddington, National Physical Laboratory Division of Materials Applications.
|
Dean, G. D. and L. National Physical (1982). Design and testing of polymers and composites: Technical exchange programme no 48/230. Teddington, National Physical Laboratory.
|
Deanin Rudolph, D., C. American Chemical Society Division of Organic Coatings and Plastics, et al. (1972). New industrial polymers. Washington, D.C., American Chemical Society.
|
Deanin, R. D. and American Chemical Society. Division of Organic Coatings and Plastics Chemistry. (1974). New industrial polymers: a symposium sponsored by the Division of Organic Coatings and Plastics Chemistry at the 167th meeting of the American Chemical Society, Los Angeles, Calif., April 1-2, 1974. Washington, American Chemical Society.
|
Deanin, R. D., M. American Chemical Society, et al. (1974). New industrial polymers: a symposium. Washington, American Chemical Society.
|
Deeprasertkul, C. (2000). Dynamic mechanical properties of carbon black filled elastomer containing liquids.
|
Deery Michael, J. (1997). Mass spectrometric studies of peptides, group 6 oxometallate complexes and synthetic polymers, University of Warwick.
|
Deghani, A. (2001). Shape separation by screening.
|
Dekker, A. J. (1959). Electrical engineering materials. Englewood Cliffs, N.J., Prentice-Hall.
|
Dekker, A. J. (1961). Electrical engineering materials. Englewood Cliffs, [N.J.]; London, Prentice-Hall.
|
DeKoven Benjamin, M., J. Gellman Andrew, et al. (1989). Interfaces between polymers, metals, and ceramics: Symposium: Spring meeting: Papers. Pittsburgh, Pa., Materials Research Society.
|
DeKoven, B. M., A. J. Gellman, et al. (1989). Interfaces between polymers, metals, and ceramics: symposium held April 25-27, 1989, San Diego, California, U.S.A. Pittsburgh, Pa., Materials Research Society.
|
Delatycki, O. and A. Plastics Institute of (1971). Mechanical performance and design in polymers: [a symposium] held at University of Melbourne, Melbourne, Australia, May 27-30, 1970. New York, Interscience.
|
Delatycki, O. and I. Australia. Plastics (1971). Mechanical performance and design in polymers: [conference] held at [the] University of Melbourne, Melbourne, Australia, May 27-30, 1970, sponsored by [the] Plastics Institute of Australia. New York; [Chichester], Interscience.
|
Delatycki, O. and Plastics Institute of Australia. (1971). Mechanical performance and design in polymers. New York, Interscience Publishers.
|
Delatycki, O., A. Plastics Institute of, et al. (1971). Mechanical performance and design in polymers. New York, Wiley.
|
Delin, M. and M. Chalmers tekniska högskola Department of Polymeric (1996). Volumetric analysis in mechanical behaviour and physical ageing of polymers. Goteborg, Department of Polymeric Materials, Chalmers University of Technology.
|
DeMejo, L. P., D. Rimai, et al. (1999). Fundamentals of adhesion and interfaces. Australia, Gordon and Breach Science Publishers.
|
Demin, O. A. (2002). Remediation of Ammonia-rich minewater in constructed wetlands: 226 leaves.
|
Denicol, P. S. (1996). Effects of pore geometry, clay content and fluid staturation on the complex impedance of reservoir rocks.
|
Denning, J. H. and J. Carswell (1981). Improvements in rolled asphalt surfacings by the addition of organic polymers. Crowthorne, Berks., Transport and Road Research Laboratory, Highways Dept; materials Division.
|
Denning, J. H., J. Carswell, et al. (1981). Improvements in rolled asphalt surfacings by the addition of organic polymers. Crowthorne, Transport and Road Research Laboratory.
|
Dentel Steven, K. and F. Water Environment Research (2000). Analysis and fate of polymers in wastewater treatment. Alexandria, Va., Water Environment Research Foundation.
|
Deo Ravi, B., R. Saff Charles, et al., Eds. (1996). Composite materials: testing and design (Twelfth volume), ASTM.
|
Deo, R. B., C. R. Saff, et al. (1996). Composite materials: testing and design. West Conshohocken, PA, ASTM.
|
Deopura, B. L., T. Indian Institute of Technology Department of Textile, et al., Eds. (2002). Polymers and textiles in the new millennium: an integral approach, Indian Institute of Technology.
|
Depireux, J., P. Radvanyi, et al. (1977). Phase transitions in bulk polymers: 6th Europhysics Conference on Macromolecular Physics, Varna, Bulgaria, September 26-29, 1977. [Geneva], European Physical Society.
|
Derrick Timothy, J. (2001). Electronic and optical properties of conjugated oligomers and polymers, South Bank University.
|
Derucher, K. N. and C. P. Heins (1981). Materials for civil and highway engineers. Englewood Cliffs, N.J., Prentice-Hall.
|
Derucher, K. N. and G. P. Korfiatis (1988). Materials for civil and highway engineers. Englewood Cliffs, N.J., Prentice Hall.
|
Derucher, K. N., G. P. Korfiatis, et al. (1998). Materials for civil and highway engineers. Upper Saddle River, N.J., Prentice Hall.
|
Des Cloizeaux, J. and G. Jannink (1990). Polymers in solution: their modelling and structure. Oxford, Oxford University Press.
|
Desai Chandrakant, S. and P. University of Arizona College of Engineering and Mines Department of Civil Engineering and Engineering Mechanics Engineering and Computational Mechanics (1987). Constitutive laws for engineering materials: theory and applications: 2nd International conference: Papers. New York; London, Elsevier.
|
Desai, C. S., M. University of Arizona Department of Civil Engineering and Engineering Mechanics Center for Material Modelling and Computational, et al. (1991). Constitutive laws for engineering materials: recent advances and industrial and infrastructure applications: 3rd International conference entitled "Constitutive laws for engineering materials: theory and applications": Papers. New York, ASME Press.
|
Desai, C. S., R. H. Gallagher, et al., Eds. (1983). Constitutive laws for engineering materials: theory and application: International conference: Papers, University of Arizona.
|
Desborough, I. J., I. H. Hall, et al. (1976). The structure of n glycol terephthalate polymers. Manchester, UMIST.
|
Design in Composite Materials, C., D. Institution of Mechanical Engineers. Aerospace Industries, et al. (1989). Proceedings of the Institution of Mechanical Engineers conference: Design in Composite Materials, 7-8 March 1989-- London. Suffolk, published for the Institution of Mechanical Engineers by Mechanical Engineering Publications.
|
Dexter, S. C. (1979). Handbook of oceanographic engineering materials. New York; Chichester (etc.), Wiley.
|
