Ottz Technic
Engineering Science Information Technology
Materials
Mechanical
Marine
Analytical Chemistry Electronics
Books about Materials Engineering
For the Materials Engineering Industry - Hundreds of Materials Engineering Books! Polymers, Composites, Ceramics, Alloys... Materials Engineering Books
Materials Engineering Books
Materials Engineering Books
Materials Engineering Books


Record 1241 to 1280
First Page Previous Page Next Page Last Page
Christodoulou, J. A. (1999). Microstructures and properties of TiAl-based alloys containing molybdenum and borides.

Chrysostomou Alicia, S. (2000). Influence of reprocessing on mechanical and fracture properties of filled and unfilled amorphous polymers, University of North London.

Chrystie, J. L., E. F. T. White, et al. (1988). Modern applications of polymers in pencil manufacture. Manchester, UMIST.

Chu, H.-P., A. Aerospace Industries, et al. (1994). Environmental, safety and health considerations: composite materials in the aerospace industry: Conference: Papers, NASA.

Chuah Siew, P. (1995). In-situ fibre formation & management of thermotropic liquid crystalline polymers in thermoplastic matrices, Brunel University.

Chum, H. L. (1991). Polymers from biobased materials. Park Ridge, N.J., U.S.A., Noyes Data Corp.

Chung Chan, I. (2000). Extrusion of polymers: theory and practice. Munich, Hanser.

Chung, C. I. (2000). Extrusion of polymers: theory and practice. Munich, Cincinnati, Hanser Publishers;

Chung, D. D. L. (2000). Composite materials for electronic functions. Zurich, Trans Tech Publications.

Chung, D. D. L. (2003). Composite materials, Science and Applications: functional materials for modern technologies. London, Springer.

Chung, D. D. L. (2003). Composite materials: functional materials for modern techniques. London, Springer.

Chung, D. D. L. (2003). Composite materials: functional materials for modern technologies. London; New York, Springer.

Chung, J. S., B. J. Natvig, et al. (1994). Proceedings of the fourth (1994) offshore and polar engineering conference, [Osaka, Japan]. Golden, Colo., International Society of Offshore and Polar Engineers (ISOPE).

Chung, J. S., M. Sayed, et al. (1995). Proceedings of the fifth (1995) offshore and polar engineering conference, [The Hague, The Netherlands]. Golden, Colo., International Society of Offshore and Polar Engineers (ISOPE).

Chung, J. S., R. S. Puthli, et al. (1997). The proceedings of the Seventh (1997) International Offshore and Polar Engineering Conference: presented at the Seventh (1996) International Offshore and Polar Engineering Conference held in Honolulu, USA, May 25-30, 1997. Golden, Colo., The Society.

Chung, T. C. and S. American Chemical, Eds. (1994). New advances in polyolefins: Symposium on new advances in polyolefins polymers: National meeting: Papers. New York, Plenum Press.

Chung, T.-s. (2001). Thermotropic liquid crystal polymers: thin-film polymerization, characterization, blends, and applications. Lancaster, Pa., Technomic Pub. Co.

Ciach, R., C. Commission of the European, et al. (1997). Light-weight materials for transportation and batteries and fuel cells for electric vehicles: proceedings of Symposium J on Light-weight Materials for Transportation and proceedings of Symposium E on Material Aspects for Electrical Vehicles Including Batteries and Fuel Cells of the 1997 ICAM/E-MRS Spring Conference, Strasbourg, France, June 16-20, 1997. Amsterdam; Oxford, Elsevier.

Ciampi, E. (1999). Magnetic Resonance Microscopy of alkyd polymers and emulsions, University of Surrey.

Ciardelli, F. and P. Giusti (1981). Structural order in polymers: invited section lectures presented at the IUPAC Symposium on Macromolecules, Florence (Italy) 1980. Basel; New York, Huthig & Wepf.

Ciardelli, F., P. Giusti, et al. (1981). Structural order in polymers: lectures presented at the International Symposium on Macromolecules Florence, Italy, 7-12 September 1980. Oxford; New York, Pergamon Press.

Ciardelli, F., P. Giusti, et al. (1981). Structural order in polymers: lectures presented at the International Symposium on Macromolecules: Florence, Italy, 7-12 September 1980. Oxford, Pergamon.

Ciardelli, F., P. Giusti, et al. (1981). Structural order in polymers, Pergamon.

Cicek, R. Z. (1981). The influence of morphology and degree of cross-linking on some physical, mechanical and wear properties of semi-crystalline polymers, Leeds.

Ciferri, A. (1991). Liquid crystallinity in polymers: principles and fundamental properties. New York, VCH Publishers.

Ciferri, A. (2005). Supramolecular polymers. Boca Raton, FL, Taylor & Francis.

Ciferri, A. and I. M. Ward (1979). Ultra-high modulus polymers. London, Applied Science Publishers.

Claesson, S. M. and V. K. La Mer (1954). Papers read during the XIIIth International Congress of Pure and Applied Chemistry, held in Stockholm July 29-August 4, 1953, and in Uppsala August 5-7, 1953. New York, Academic Press.

Clarici, E. (1995). Modelling environmental data using artificial neural networks.

Clark Samuel John, M. (1997). Novel fluorinated polymers, University of London.

Clark, A. F., R. P. Reed, et al. (1979). Nonmetallic materials and composites at low temperatures. New York; London, Plenum Press.

Clark, A. F., R. P. Reed, et al. (1983). Materials at low temperatures. Metals Park, Ohio, American Society for Metals.

Clark, A., R. Hignett, et al. (2001). Low-cost synthesis and evaluation of polymers prepared from oilseed rape and Euphorbia lagascae oils: I: Project at University of Warwick; II: Project at Mid-Kent College, Home Grown Cereals Authority.

Clark, A., R. Hignett, et al. (2001). Low-cost synthesis and evaluation of polymers prepared from oilseed rape and euphorbia lagascae oils. London, HGCA, Research & Development.

Clark, A., R. Hignett, et al. (2001). Low-cost synthesis and evaluation of polymers prepared from oilseed rape and Euphorbia Lagascae oils. London, Home-Grown Cereals Authority.

Clark, G. (1995). Synthetic water soluble liquid-crystalline polymers, Leeds.

Clark, J., A. United States Congress Office of Technology, et al. (1985). Potential of composite materials to replace chromium, cobalt and manganese in critical applications. [Springfield, Va.?], National Technical Information Service.

Clark, S. J. M. (1997). New fluorinated polymers.

Clarke Andre, P. (1997). Studies of the phase behaviour of fluids and their mixtures in confined geometries and free-volume within various polymers, University of Bristol.

Clarke Edward, T. (1994). Towards organic ferromagnetic polymers, University of Lancaster.


First Page Previous Page Next Page Last Page




Sitemap
Link | Link | Link | Link | Link | Link | Link | Link


powered by FreeFind


Last Modified: 12 October 2005
http://www.ottz.com