Charlesby, A. (1968). Atomic radiation and polymers. Oxford, Pergamon P.
|
Charojrochkul, S. (1998). Evaluation of oxide cathodes fabricated via flame assisted vapour deposition technique.
|
Charreyre, M.-T., J. Claverie, et al., Eds. (2000). Polymers in dispersed media, Wiley-VCH.
|
Chasin, M. and R. S. Langer (1990). Biodegradable polymers as drug delivery systems. New York, M. Dekker.
|
Chatten, R. (2002). The effect of intermolecular forces on diffusion in polymers, Brunel University.
|
Chattopadhyay, S. (1979). Grafting of rubber-like polymers via exciplex interaction.
|
Chaturvedi Shive, K. and E. Ohio State University Department of Civil (1992). Failure mechanisms in composite materials and structures: global-local finite element method: (final report). Columbus, Ohio, Dept. of Civil Engineering, the Ohio State University.
|
Chaudhry, N. A. (1995). Effects of aligned discontinuities on elastic and transport properties of reservoir rocks.
|
Chaudhry, T. S. (1995). Deformation and recrystallization of 2-phase aluminium alloys.
|
Chauhan, P. (1973). Effect of frequency and temperature on fatigue crack propagation in polymers.
|
Chawla Krishan, K. (1987). Composite materials: science and engineering. New York; London, Springer.
|
Chawla, K. K. (1998). Composite materials: science and engineering. New York, Springer.
|
Chawla, K. K., P. K. Liaw, et al. (1994). High performance composites, commonalty of phenomena: proceedings of an international symposium sponsored by the joint TMS/ASM Composite Materials Committee and the TMS Non-Metallic Materials Committee, held during Materials Week '94, in Rosemont Illinois, Oct 2-6, 1994. Warrendale, Pa., Minerals, Metals & Materials Society.
|
Chemical Industry Safety and Health Council. Occupational Hygiene, S.-C. (1980). A Guide to the evaluation and control of toxic substances in the work environment. London (93 Albert Embankment, SE1 7TU), Health Committee of the Chemical Industry Safety and Health Council of the Chemical Industries Association.
|
Chemical Marketing Research, A. (1990). Facing the 1990's: specialities, polymers, biotech, agriculture and the environment: Meeting: Papers. Staten Island, Chemical Marketing Research Association.
|
Chemical, S. (1961). Inorganic polymers: the lectures delivered at an Internatiional Symposium held at Nottingham on 18th-21st July, 1961, organised jointly by the University of Nottingham and the Chemical Society. London, Chemical Society.
|
Chemical, S. (1968). Solution properties of natural polymers: an international symposium held at Edinburgh. London, Chemical Society.
|
Chemical, S., U. Nottingham, et al. (1961). Inorganic polymers. London, Chem. Soc.
|
Chemicals, B. P. (1988). Hyvis/Napvis polybutenes: Hyvis and Napvis polymers: food contact status. London, BP Chemicals Limited.
|
Chen Eric, J. H., G. Pantano Carlo, et al. (1990). Interfaces in composites: Symposium on tailored interfaces in composite materials: Fall meeting: Selected papers. Pittsburgh, Pa., Materials Research Society.
|
Chen, A.-B. and A. Sher (1995). Semiconductor alloys: physics and materials engineering. New York, Plenum Press.
|
Chen, P. (2005). Molecular interfacial phenomena of polymers and biopolymers. Cambridge, Woodhead.
|
Chen, W.-F. (1995). The civil engineering handbook. Boca Raton; London, CRC Press.
|
Chen, Y. (2000). Towards anisotropy in ordered conducting polymers, University of Aberdeen.
|
Chen, Y. K. (1996). Tribology of polymers and composites in unlubricated rolling and sliding contact. Birmingham, University of Birmingham.
|
Chen, Z.-K., E.-T. Kang, et al. (2005). Proceedings of the international conference on materials and advanced technologies: symposium B: polymers and organic materials for electronic, optoelectronic and photonic devices.
|
Cheng Stephen, Z. D. (2002). Handbook of thermal analysis and calorimetry. Amsterdam; London, Elsevier.
|
Cheng Stephen, Z. D., L. Thomas Edwin, et al., Eds. (1998). Metastable state and metastability in polymers, Elsevier Science.
|
Cheng, D. C.-H. (1975). On the role of torque measurement in mixing with heat transfer, mass transfer and chemical reaction including the determination of curing properties of rubbers and polymers. Stevenage, Warren Spring Laboratory.
|
Cheng, H. N. and L. Rapra Technology (2001). Structural studies of polymers by solution NMR. Shrewsbury, Rapra Technology Limited.
|
Cheng, H. N., A. D. English, et al. (2003). NMR spectroscopy of polymers in solution and in the solid state. Washington, D.C., American Chemical Society.
|
Cheng, H. N., D. English Alan, et al. (2002). NMR spectroscopy of polymers in solution and in the solid state.
|
Cheng, H. N., G. L. Cote, et al. (1999). Application of polymers in food. Weinheim; Cambridge, Wiley-VCH.
|
Cheng, H. N., L. Cote Gregory, et al., Eds. (1999). Application of polymers in foods, Wiley-VCH Verlag.
|
Cheng, J. J. R., A. Elwi Alaa Eldin, et al. (1998). Rehabilitation of unreinforced masonry walls with externally applied fiber reinforced polymers. Edmonton, Alta., Department of Civil Engineering, University of Alberta.
|
Cherdron, H., C. Gesellschaft Deutscher Chemiker. Fachgruppe Makromolekulare, et al. (2001). Tailormade polymers. Weinheim, Wiley-VCH.
|
Cherdron, H., I. Meisel, et al., Eds. (2001). Tailormade polymers, Wiley.
|
Cheremisinoff, N. P. (1993). Guidebook to commercial polymers: properties and applications. Englewood Cliffs, N.J., PTR Prentice Hall.
|
Cheremisinoff, N. P. and P. N. Cheremisinoff (1995). Handbook of advanced materials testing. New York, M. Dekker.
|
Cherkaev, A. and R. V. Kohn (1997). Topics in the mathematical modelling of composite materials. Boston, Birkhäuser.
|
