Brandt, A. M., I. H. Marshall, et al. (1986). Brittle matrix composites. London; New York, Elsevier Applied Science Publishers.
|
Brandt, J., H. L. Hornfeld, et al. (1992). Advanced materials and structures from research to application: proceedings of the 13th International European Chapter conference of the Society for the Advancement of Material and Process Engineering, Hamburg, Germany, May 11-13, 1992. Niederglatt, Switzerland, SAMPE.
|
Brandt, R. G. and I. Office of Naval Research Conference on the Science of Composite (1990). Science of composite interfaces: proceedings of the Office of Naval Research Conference on the Science of Composite Interfaces, Leesburg, Va., USA, April 18-21, 1989. London, Elsevier Science.
|
Brandt, R. G. and I. Office of Naval Research Conference on the Science of Composite (1990). Science of composite interfaces, Elsevier.
|
Brankov, G. I. (1967). [Mekhanika na polimerite. Sofiîa, Izd-vo na Bshlgarskata akademiîa na naukite.
|
Brassett Anne, J. (1993). Photoexitations in conjugated polymers and biopolymers, University of Cambridge.
|
Bratislava Conference on, P. and D. International Union of Pure and Applied Chemistry Macromolecular (1976). Modified polymers, their preparation and properties: main lectures presented at the Fourth Bratislava Conference on Polymers. held in Bratislava, Czechoslovakia, 1-4 July 1975.
|
Braun, D., J. C. Bevington, et al. (1994). Papers presented at the "Fifteenth Annual International Conference on Advances in the Stabilization and Degradation of Polymers" in Luzern (Switzerland), June 2-4, 1993. Basel, Huthig & Wepf.
|
Bray, D. J. (1991). The preparation, microstructures and some properties of vapour deposited Mg-Mn, Mg-Cr and Mg-Si alloys.
|
Brearley, H. and F. Ibbotson (1902). The analysis of steel-works materials. London, New York, Longmans, Green.
|
Brebbia, C. A., J. Kenny, et al., Eds. (1997). Computational acoustics and its environmental applications II, Computational Mechanics Publications.
|
Brebbia, C. A., W. P. De Wilde, et al. (1988). Computer aided design in composite material technology: proceedings of the International Conference, Southampton, 1988. Southampton, Computational Mechanics.
|
Brédas, J. L. (1999). Conjugated oligomers, polymers, and dendrimers: from polyacetylene to DNA: proceedings of the Fourth Francqui Colloqium, 21-23 October 1998, Brussels. Paris, De Boeck Université.
|
Brédas, J. L. and R. J. Silbey (1991). Conjugated polymers: the novel science and technology of highly conducting and nonlinear optically active materials. Dordrecht; Boston, Kluwer Academic Publishers.
|
Brédas, J.-L., Ed. (1999). Conjugated oligomers, polymers, and dendrimers: from polyacetylene to DNA, De Boeck Universite.
|
Brennan, W. J. and D. University of (1984). An ESCA investigation of low energy electron beam modification and formation of polymers, University of Durham.
|
Breyer, D. E. (1987). Design of wood structures. New York; London, McGraw-Hill.
|
Breyer, D. E. and J. A. Ank (1980). Design of wood structures. New York; London, McGraw-Hill.
|
Briant, C. L. (1999). Impurities in engineering materials: impact, reliability, and control. New York, Marcel Dekker.
|
Bridge, L., M. Gordon, et al. (1962). The thermal ageing of electrical insulating films. The rate of cure of network polymers and the superposition principle, Manchester.
|
Bridle Christopher, M. (1990). The use of thermotropic liquid crystal polymers in optical fibre cable applications, Brunel University.
|
Briggs, A. and C. Wolfson (1992). The science of new materials. Oxford, UK; Cambridge, Mass., USA, Basil Blackwell.
|
Briggs, D. (1998). Surface analysis of polymers by XPS and static SIMS. Cambridge, U.K.; New York, Cambridge University Press.
|
Brighton, C. A., G. Pritchard, et al. (1979). Styrene polymers: technology and environmental aspects. London, Applied Science Publishers.
|
Brinker, C. J. and G. W. Scherer (1990). Sol-gel science: the physics and chemistry of sol-gel processing. Boston; London, Academic Press.
|
Brinson, L. C., D. Dillard, et al., Eds. (2003). Time dependent properties of polymers, adhesives and composites.
|
British Coatings Federation. and European Resin Manufacturers Association. (1995). Polymers paint colour journal: PPCJ. Redhill, England, FMJ International Publications: v.
|
British Columbia. Ministry of Transportation and Highways. Geotechnical & Materials Engineering Branch. (1996). Natural hazards in British Columbia. Victoria, B.C., The Ministry.
|
British Composites, S. and D. Institution of Mechanical Engineers. Aerospace Industries (1989). Design in composite materials: conference, 7-8 March 1989, Institution of Mechanical Engineers, Birdcage Walk, London. Bury St. Edmunds, Published for the Institution of Mechanical Engineers by Mechanical Engineering Publications.
|
British Composites, S. and D. Institution of Mechanical Engineers. Aerospace Industries (1989). Design in composite materials: proceedings of the Institution of Mechanical Engineers Conference held on 7 - 8 March 1989. London, published for the Institution of Mechanical Engineers by Mechanical Engineering Publications.
|
British Plastics, F. (1969). PTFE and associated polymers: guide to the products and services of the Fluorocarbons processors group. London, British Plastics Federation.
|
British Plastics, F. (1986). The world of plastics. London, BPF.
|
British Standards, I. (1989). British standard specification for denture base polymers. London, British Standards Institution.
|
Britton, R. N. (1977). The structure and properties of highly oriented polymers, Leeds.
|
Brock, D. L. and L. Massachusetts Institute of Technology. Artificial Intelligence (1991). Review of artificial muscle based on contractile polymers. [Cambridge, Mass.], Massachusetts Institute of Technology, Artificial Intelligence Laboratory.
|
Broderick, J. S. (1984). The fracture and fatigue of glassy polymers, Leeds.
|
Broeders, C. H. M., A. Y. Konobeyev, et al. (2004). IOTA: a code to study ion transport and radiation damage in composite materials. Karlsruhe, Forschungszentrum Karlsruhe.
|
Broek, D. (1988). The practical use of fracture mechanics. Dordrecht; London, Kluwer Academic Publishers.
|
Brookhaven National Laboratory Department of Applied, S. (1988). Electroresponsive polymers: Symposium: Papers, Gordon and Breach.
|
Brooks Jason, T. (1992). Polymers in surfactant mesophases, University of Cambridge.
|
