Berthelot, J.-M. (1999). Composite materials: mechanical behavior and structural analysis. New York; London, Springer.
|
Bertholet, J.-M. (1999). Composite materials: mechanical behavior and structural analysis. New York, Springer.
|
Bessonov, M. I. (1987). Polyimides: thermally stable polymers. New York; London, Consultants Bureau.
|
Bessonov, M. I. and W. W. Wright (1987). Polyimides: thermally stable polymers. London; New York, Consultants Bureau.
|
Bessonov, M. I. and W. W. Wright (1987). Polyimides--thermally stable polymers. New York, Consultants Bureau.
|
Best, S. M. (1990). Characterisation, sintering, and mechanical behaviour of hydroxyapatite ceramics.
|
Betz, N. and A. l. Moel, Eds. (2001). Ionizing radiation and polymers: (IRaP 2000), Elsevier.
|
Betz, N., Ed. (1997). Ionizing radiation and polymers, North-Holland.
|
Bevington John, C. and G. Allen (1989). Comprehensive polymer science: the synthesis, characterization, reactions and applications of polymers. Oxford, Pergamon.
|
Bevis, M. J., H. Thapar, et al. (1985). Melt processing and properties of liquid crystal polymers: Final report. Uxbridge, University of Brunel Department of Materials Technology.
|
Beyer, G. P. (1995). A study of ion beam induced artefacts during the SIMS depth profiling of semi conducting matrices.
|
Beymer, D. J. and L. Massachusetts Institute of Technology. Artificial Intelligence (1991). Dynamic model and control of an artificial muscle based on contractile polymers. [Cambridge, Mass.], Massachusetts Institute of Technology, Artificial Intelligence Laboratory.
|
Bhagat Ram, B., T. M. S. A. S. M. C. M. C. Joint, et al. (1990). Metal and ceramic matrix composites: processing, modeling and mechanical behavior: proceedings of an international conference sponsored by the Joint TMS/ASM Composite Materials Committee. [et al.] and held at the TMS Annual Meeting in Anaheim, California. 1990. Warrendale, Pa., TMS.
|
Bhagat, R. B., Joint TMS/ASM Composite Materials Committee., et al. (1990). Metal & ceramic matrix composites: processing, modeling & mechanical behavior: proceedings of an international conference sponsored by the Joint TMS/ASM Composite Materials Committee, the TMS Powder Metallurgy Committee and the TMS Physical Metallurgy Committee, and held at the TMS Annual Meeting in Anaheim, California, February 19-22, 1990. Warrendale, Pa., TMS.
|
Bhardwaj, I. S. and C. Indian Petrochemicals Corporation Ltd Research, Eds. (1994). Polymer science: recent advances: Polymers '94: Symposium: Papers. New Delhi, Allied Publishers.
|
Bhat, S. V. (2002). Biomaterials. Boston, Kluwer Academic Publishers.
|
Bhatnagar, V. M. and Alena Enterprises of Canada. (1980). Fire retardants: proceedings of 1978 Conference on Flammability and Fire Retardants, July 13-14, 1978, Copenhagen, Denmark. Westport, CT., Technomic Pub. Co.
|
Bhatt, P. (2002). Programming the dynamic analysis of structures. London, Spon Press.
|
Bhattacharya Swapan, K. (1986). Metal-filled polymers: properties and applications. New York, Dekker.
|
Bhattacharya, S. K. (1986). Metal-filled polymers: properties and applications. New York, M. Dekker.
|
Bhattacharyya, D. (1997). Composite sheet forming. Amsterdam; New York, Elsevier.
|
Bhiwasariya, M. O. (1967). Deposition of vinyl polymers in viscose rayon, Leeds.
|
Bialecki, R. (1992). Behaviour of rock under electrical stress.
|
Bibo, G. A. (1997). Deformation and fracture of non-crimp fabric composites.
|
Bicerano, J. (1992). Computational modeling of polymers. New York, M. Dekker.
|
Biesenberger, J. A. (1983). Devolatilization of polymers: fundamentals, equipment, applications. Munich, Hanser Publishers.
|
Biesenberger, J. A., Ed. (1983). Devolatilization of Polymers. Munchen, Hanser.
|
Biggers Sherrill, B., T.-W. Chou, et al., Eds. (1991). Use of composite materials in transportation systems: Symposium: Winter annual meeting: Papers, ASME.
|
Biggers, S. B., T.-W. Chou, et al. (1991). Use of composite materials in transportation systems: presented at the Winter Annual Meeting of the American Society of Mechnical Engineers, Atlanta, Georgia, December 1-6, 1991. New York, N.Y., ASME.
|
Bikales Norbert, M. (1971). Characterization of polymers. New York; [Chichester], Wiley-Interscience.
|
Bikales Norbert, M. (1971). Mechanical properties of polymers. New York; [Chichester], Wiley-Interscience.
|
Bikales Norbert, M. and C. American Chemical Society Division of Organic Coatings and Plastics (1973). Water soluble polymers: proceedings of a symposium. New York; London, Plenum.
|
Bikales, N. M. (1971). Characterization of polymers. New York, Wiley-Interscience.
|
Bikales, N. M. (1971). Mechanical properties of polymers. New York, Wiley-Interscience.
|
Bikales, N. M. and American Chemical Society. Division of Organic Coatings and Plastics Chemistry. (1973). Water-soluble polymers; proceedings of a symposium held by the American Chemical Society, Division of Organic Coatings and Plastics Chemistry, in New York City on August 30-31, 1972. New York, Plenum Press.
|
Bikales, N. M. and L. Segal (1971). Cellulose and cellulose derivatives. New York; [Chichester], Wiley-Interscience.
|
Bikales, N. M., Ed. (1971). Mechanical properties of polymers: encyclopedia reprints. New York, Wiley-Interscience.
|
Bilde-Sorensen, J. B. and L. Riso National (1989). Materials architecture: 10th International symposium on metallurgy and materials science: Papers. Roskilde, Riso National Laboratory.
|
Billingham, N. C. (1989). Conducting polymers/molecular recognition. Berlin; London, Springer-Verlag.
|
Billmeyer Fred, W., J. Mitchell, et al. (1965). Analysis and Fractionation of Polymers. Edited by John Mitchell. and Fred W. Billmeyer. American Chemical Society Symposia held at Chicago, Illinois, September 2-3, 1964. [With illustrations.]. Easton, Interscience Publishers.
|
