Basham, K. D. and American Society of Civil Engineers. Materials Engineering Division. (1994). Infrastructure: new materials and methods of repair: proceedings of the Third Materials Engineering Conference, San Diego, California, November 13-16, 1994. New York, American Society of Civil Engineers.
|
Bashir, S. and C. University of Warwick. Dept. of (2001). The development of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and its application to the study of polymers and biopolymers: xiv, 322 p + CD-ROM.
|
Bashir, S. and W. University of (2001). The development of matrix assisted laser desorption ionization time of flight mass spectrometry and its application to the study of polymers and biopolymers.
|
Basoalto, H. C. (1996). Weight function formalism applied to crack bridging problems.
|
Bassett David, R., E. Hamielec Alvin, et al. (1981). Emulsion polymers and emulsion polymerization: based on a symposium cosponsored by the Divisions of Organic Coatings and Plastics Chemistry and Polymer Chemistry at the Second Chemical Congress of the North American Continent (180th ACS National Meeting), Las Vegas, Nevada, August 25-29, 1980. Washington, D.C., American Chemical Society.
|
Bassett David, R., E. Hamielec Alvin, et al. (1981). Emulsion polymers and emulsion polymerization. Washington, D.C., ACS.
|
Bassett, D. C. (1982). Developments in crystalline polymers. London, Applied Science Publishers.
|
Bassett, D. C. (1988). Developments in crystalline polymers - 2. London; New York; New York, Elsevier Applied Science Pub., Ltd.: Elsevier Science Pub. Co., Inc., sole distributor in USA and Canada.
|
Bassett, D. C. (1988). Developments in crystalline polymers. London, Elsevier Applied Science.
|
Bassett, D. R., A. E. Hamielec, et al. (1981). Emulsion polymers and emulsion polymerization: based on a symposium cosponsored by the Divisions of Organic Coatings and Plastics Chemistry and Polymer Chemistry at the Second Chemical Congress of the North American Continent (180th ACS National Meeting), Las Vegas, Nevada, August 25-29, 1980. Washington, D.C., American Chemical Society.
|
Bassi, R. S. (1994). Corrosion mapping of coated steel by a computer controlled probe technique.
|
Bastiaansen Cees, W. M., A. Tervoort Theo, et al., Eds. (2000). International symposium on polymers in display applications, Wiley-VCH.
|
Bastioli, C. and L. Rapra Technology (2005). Handbook of biodegradable polymers. Shrewsbury, Rapra Technology.
|
Basu, S. C. (1979). The effect of some physical parameters on the frictional behaviour of fibrous polymers, Leeds.
|
Bat*i*uk, V. P. e., Nauchny*i sovet po problemam pochvovedeni*i*a i meliora*t*sii pochv (Akademi*i*a nauk SSSR), et al. (1978). Primenenie polimerov i poverkhnostno-aktivnykh veshchestv v pochvakh. Moskva (117485, Moskva, V-485, Profso*i*uzna*i*a ul., 94a), Nauka.
|
Bate, D. M. (1998). Kinetics and mechanisms of the thermal degradation of some acrylic polymers and polymer blends. Birmingham, University of Birmingham.
|
Bathias, C. and M. Uemura, Eds. (1990). Advanced composite materials: new materials, applications, processing, evaluation and databases: 1st France-Japan seminar on composite materials: Papers. Paris, SIRPE.
|
Bathias, C. and M. Uemura, Eds. (1991). Advanced composite materials II: leading part for the XX1st Century: 2nd Japan-France seminar on composite materials: Papers. Paris, Sirpe.
|
Batson, R. G. C. and J. H. Hyde (1931). Mechanical testing. London, Chapman & Hall, ltd.
|
Battaerd, H. A. J. (1967). Craft Copolymers. New York, Interscience Publishers.
|
Batteas, J. D., C. A. Michaels, et al. (2005). Applications of scanned probe microscopy to polymers. Washington, DC, American Chemical Society.
|
Battista, O. A. (1958). Fundamentals of high polymers. New York, Reinhold Pub. Corp.
|
Baur, H. (1999). Thermophysics of polymers I: theory. Berlin; New York, Springer.
|
Baur, H. (1999). Thermophysics of polymers. Berlin; London, Springer.
|
Baxter, R. I. (1996). The erosion and structural characterisation of low density carbon-carbon composites.
|
Bayer, R. G. and G. o. E. a. W. S. G. o. W. American Society for Testing and Materials. Committee (1976). Selection and use of wear tests for metals: a symposium presented at November Committee Week, American Society for Testing and Materials, New Orleans, La., 17-21 Nov. 1975. Philadelphia, American Society for Testing and Materials.
|
Baylis, E. R. H. (1986). The interactions between the pendant groups and the main chain in side chain liquid crystalline polymers.
|
Beam, J. L., J. S. Robinson, et al. (1997). Centerline joint repair using preformed joint inserters: final report. [Harrisburg] [Springfield, VA, Pennsylvania Dept. of Transportation]
|
Beamson, G. and D. Briggs (1992). High resolution XPS of organic polymers: the Scienta ESCA300 database. Chichester [England]; New York, Wiley.
|
Beaton, N. C. (1975). Dynamic aspects of crystallization and mass transport in polymers and polymeric membranes for pharmaceutical use.
|
Beattie, S. R. (1981). The thermal decomposition of some silphenylene-siloxane polymers, by Sheila R. Beattie.
|
Beattie, S. R. (1981). The thermal decomposition of some silphenylene-siloxane polymers, University of Glasgow.
|
Beaumont Peter, W. R., M. Schultz Jerold, et al. (1990). Failure analysis of composite materials, Technomic.
|
Beaumont, P. W. R. and E. University of Cambridge Department of (1988). The micromechanisms of crack extension in brittle polymers containing rubbery particles, University of Cambridge Department of Engineering.
|
Beaumont, P. W. R., A. G. Evans, et al. (1984). On the toughness of particulate filled polymers, University of Cambridge Department of Engineering.
|
Beaumont, P. W. R., J. M. Schultz, et al. (1990). Failure analysis of composite materials. Lancaster, PA, Technomic Pub. Co.
|
Beaumont, P. W. R., K. D. Cowley, et al. (1996). Fracture and damage mechanics of composite materials at elevated temperature: vol. 1, University of Cambridge, Department of Engineering.
|
Beaumont, P. W. R., K. D. Cowley, et al. (1996). Fracture and damage mechanics of composite materials at elevated temperature: vol. 2, University of Cambridge, Department of Engineering.
|
Beaumont, P. W. R., K. D. Cowley, et al. (1997). Damage mechanics of composite materials at elevated temperature, University of Cambridge, Department of Engineering.
|
Beaumont, P. W. R., M. F. Ashby, et al. (1984). Deformation maps for amorphous polymers, University of Cambridge Department of Engineering.
|
