Bak, P. R. G. (1991). Applied solid modelling in mineral resources engineering.
|
Baker, A. A., S. Dutton, et al. (2004). Composite materials for aircraft structures. Reston, VA, American Institute of Aeronautics and Astronautics.
|
Baker, G. L. and Z. V. Vardeny, Eds. (1992). Optical probes of conjugated polymers: Conference: Papers, Elsevier Sequoia.
|
Baker, G. L., Z. V. Vardeny, et al. (1992). Proceeding of the Conference on Optical Probes of Conjugated Polymers, Snowbird, UT, USA, August 22-25, 1991. Lausanne, Elsevier.
|
Baker, M. A. and S. University of (1983). The growth and removal of carbon and hydrocarbon polymers by low pressure plasmas. Brighton, University of Sussex.
|
Baker, S. J. (1998). Oxygen diffusion in natural and synthetic perovskites.
|
Bakhvalov, N. and G. Panasenko (1989). Homogenisation: averaging processes in periodic media: mathematical problems in the mechanics of composite materials. Dordrecht, Kluwer.
|
Bakhvalov, N. S. and G. P. Panasenko (1989). Homogenisation: averaging processes in periodic media: mathematical problems in the mechanics of composite materials. Dordrecht; Boston, Kluwer Academic Publishers.
|
Bakhvalov, N. S. and Panasenko (1989). Homogenisation: mathematical problems in the mechanics of composite materials, Kluwer Academic.
|
Bakis, C. E. and A. I. S. o. C. M. T. a. Design (2003). Composite materials: testing and design, fourteenth volume. W. Conshohocken, Pa., ASTM.
|
Bakis, C. E., D. o. C. M. American Society for Testing Materials. International Committee, et al., Eds. (2003). Composite materials: testing and design.
|
Balachandran, U. and C. International Cryogenic Materials (2000). Advances in cryogenic engineering materials. New York; London, Kluwer Academic.
|
Balachandran, U. B. and C. International Cryogenic Materials (1998). Advances in cryogenic engineering materials. New York; London, Plenum.
|
Balasubramanian, N. (1987). Advanced composite materials index, 1975-1984. Lancaster, Technomic Pub. Co.
|
Baldock, S. J., P. Fielden, et al. (1994). Fabrication of silicone polymers suitable for use in electrokinetically driven miniaturised flow-injection analysis. Manchester, UMIST.
|
Baldwin Lionel, V., S. Down Kenneth, et al. (1981). Educational technology in engineering. Washington, National Academy Press.
|
Baldwin, K. J. (1997). Photophysics of conjugated polymers and oligomers, Leeds.
|
Baldwin, T. and I. Kroschwitz Jacqueline, Eds. (1989). Polymers: biomaterials and medical applications. Encyclopedia reprint series. New York, Wiley.
|
Ballard, T. J. (1990). An experimental study of some mechanisms of formation damage caused by oil-drilling fluid filtrate.
|
Baltá-Calleja, F. J. and C. G. Vonk (1989). X-ray scattering of synthetic polymers. Amsterdam; New York, Elsevier.
|
Baltá-Calleja, F. J. and S. i. Fakirov (2000). Microhardness of polymers. Cambridge, [England], Cambridge University Press.
|
Bamberger, M., M. Schorr, et al., Eds. (1991). IMEC 5: 5th Israel materials engineering conference: Papers. Tel Aviv, Freund Publ House.
|
Bamford, C. H. (1980). Design and application of functional polymers -: Frontier of Polymer Science, Yamada Science Foundation.
|
Bamford, C. H. and C. F. H. Tipper (1975). Comprehensive chemical kinetics. Amsterdam; Oxford [etc.], Elsevier Scientific.
|
Bamford, C. H. and C. F. H. Tipper (1975). Degradation of polymers. Amsterdam; New York, Elsevier Scientific Pub. Co.
|
Bamford, D. and B. University of (2002). The local free volume and its correlation with the structural, chemical and dynamic properties of branched polymers, polymer electrolytes, highly oriented polyethylene fibres and other polymers.
|
Bandurek, G. R. and O. University of (1982). Some transport properties of composite materials, University of Oxford.
|
Banevi*cius, R. and P. Banevi*cius (2003). Mechanics of heat-resistant polymers. Kaunas, "Technologija".
|
Bank Lawrence, C. and M. Ben-Bassat, Eds. (1995). Composite materials for civil engineering construction, [np].
|
Bank Lawrence, C., A. M. E. Congress, et al. (1999). Materials and construction: exploring the connection. Reston, VA, American Society of Civil Engineers.
|
Bank, L. C. and American Soceity of Civil Engineers. (1999). Materials and construction: exploring the connection: proceedings of the Fifth ASCE Materials Engineering Congress, May 10-12, 1999, Cincinnati, Ohio. Reston, VA, American Society of Civil Engineers.
|
Banks, M. (1991). Flame retardation of polymers by chemical modification with phosphorus-containing compounds, University of Lancaster.
|
Bansal, N. P. and R. H. Doremus (1986). Handbook of glass properties. Orlando, Academic Press.
|
Baptiste, D. and C. Association pour les Matériaux, Eds. (1998). 10th French national colloquium on composite materials, Elsevier.
|
Barambo*im, N. K. and R. J. Moseley (1964). Mechanochemistry of polymers. London, Rubber and Plastics Association of Great Britain: Maclaren & Sons.
|
Baramboim Nikolai, K. (1964). Mechanochemistry of polymers, Maclaren.
|
Baramboim Nikolai, K. and R. J. Moseley (1964). [)NíÅÈÁÎÏÈÉÍÉÑ ÐÏÌÉÍÅÒÏ×.)P] Mechanochemistry of Polymers. Translated. by R. J. Mosely, etc. London, MacLaren & Sons.
|
Baramboim, N. K. and W. F. Watson (1967). Mechanochemistry of polymers. London, MacLaren and Sons Ltd.
|
Baramboim, N. K., W. F. Watson, et al. (1964). Mechanochemistry of polymers. London, Maclaren.
|
Barashkov, N. N. and O. A. Gunder (1993). Fluorescent polymers. New York, Ellis Horwood.
|
