Allen, C. W., P. Symposium on Polymers with Unusual, et al. (1983). Polymers with unusual properties: proceedings of the 13 Northeast Regional Meeting of the American Chemical Society, 28-30 June 1982. Burlington, Vermont.
|
Allen, G. (1993). Crystallinity in polymers [article]: an historical view.
|
Allen, G. and J. C. Bevington (1989). Comprehensive polymer science: the synthesis, characterization, reactions & applications of polymers. Oxford, England; New York, Pergamon Press.
|
Allen, G. and J. C. Bevington (1989). Comprehensive polymer science: the synthesis, characterization, reactions and appplications of polymers. Oxford, England; New York, Pergamon Press.
|
Allen, H. G., E. University of Southampton. Department of Civil, et al. (1996). Sandwich construction 3. Warley, West Midlands, Engineering Materials Advisory Services Ltd.
|
Allen, L. (1994). Studies on retrograde gas condensate systems for indentification of impairment of recovery and flow.
|
Allen, N. S. and J. F. McKellar (1980). Photochemistry of dyed and pigmented polymers. London, Applied Science Publishers.
|
Allen, N. S. and W. Schnabel (1984). Photochemistry and photophysics in polymers: the proceedings of an international conference on polymer photochemistry held on 2-3 June, 1983 at the Hahn-Meitner-Institut für Kernforschung, Bereich, Stahlenchemie, Berlin, Federal Republic of Germany. London, Elsevier Applied Science.
|
Allen, N. S., C. V. Horie, et al., Eds. (1992). Polymers in conservation: International conference: Papers, Royal Society of Chemistry.
|
Allen, N. S., J. F. Rabek, et al. (1985). New trends in the photochemistry of polymers. London; New York
|
Allen, T. (1990). Particle size measurement. London, Chapman and Hall.
|
Al-Mahrooqi, S. H. (2004). Laboratory and numerical investigation of NMR relaxation measurements to study reservoir wettability: 153 leaves.
|
Al-Malaika, S. (1997). Reactive modifiers for polymers. London; New York, Blackie Academic & Professional.
|
Al-Marhoon, N. O. (1999). The near well-bore flow behaviour for heterogeneous porous media.
|
Almas, M. (1989). Effect of second phase particles on the thermo-mechanical processing of alloys.
|
Almenara Chau, J. R. (1992). Investigation of the cutting process in sandstones with blunt PDC cutters.
|
Al-Mjeni, R. A.-M. M. (2003). The effect of clay, salinity and saturation on the high-frequency electrical properties of shaly sandstones: 234 leaves.
|
Alqudah, A. A. and B. Queen's University of (2002). Thermographic investigation of modern dental resin composite materials in-vitro.
|
Al-Raihani, H. R. M. (1994). Preparation of ceramic powders from molten salts.
|
Al-Turki, T. M. (1982). Approaches to crown ether containing polymers. Birmingham, University of Birmingham.
|
Altus, E. (1989). Mechanics of composite materials: an introductory course. [Toronto], University of Toronto, Institute for Aerospace Studies.
|
Aluminium Development, A. (1957). A symposium on aluminium and its alloys in electrical enginering, London.
|
Amanullah, M. (1994). Shale-drilling mud interactions.
|
Amass Allan, J., R. S. M. G. UK, et al., Eds. (1994). Macromolecules '92: 3rd Euro-American conference on functional polymers and biopolymers: Papers, Marcel Dekker.
|
Amass Allan, J., U. K. MacroGroup, et al., Eds. (2000). Macromolecules '99: polymers in the new millennium, Wiley.
|
Amass, A. J., B. C. Anderson, et al. (1994). Papers presented at the Macromolecules '92 Third Euro-American Conference on Functional Polymers and Biopolymers: University of Kent, Canterbury, UK, September 7-11, 1992. New York, Dekker.
|
Ambjørn, J., J. Durhuus Bergfinnur, et al. (1999). Branched polymers re-revisited. Aarhus, Centre for Mathematical Physics and Stochastics, University of Aarhus.
|
Ambrose, J. C. (1992). Wetting and spreading of nickel brazes on steel substrates.
|
Amer, E. M. and S. University of (2002). Thermal analysis and kinetic studies of the decomposition of some high performance polymers.
|
American Association for the Advancement of Science. (1950). Centennial: collected papers presented at the Centennial Celebration, Washington, D.C., September 13-17, 1948. Washington, D.C., the Association.
|
American Ceramic Society Department of Materials and Metallurgical, E. and E. University of Michigan Department of Materials Science and (1987). 14th Automotive materials conference: Papers, The Society.
|
American Chemical Society Division of Industrial and Engineering, C. and M. American Chemical Society (1968). Stabilization of polymers and stabilizer processes: papers. Washington, American Chemical Society.
|
American Chemical Society Division of Polymer, C. (1987). Polymers in agriculture: Symposium: Louisiana meeting: Papers, ACS, Division of Polymer Chemistry.
|
American Chemical Society Division of Polymeric Materials: Science and, E. (1988). Environment degradation and stabilization of polymers: Symposium: 3rd Chemical congress of North America: Papers, ACS.
|
American Chemical Society Polymeric Materials: Science and Engineering, I. (1987). New life in old polymers: Symposium: Fall meeting: Papers and programme, American Chemical Society.
|
American Chemical Society Polymeric Materials: Science and Engineering, I. (1987). Water-soluble and water-swellable polymers: Symposium: Fall meeting: Papers and programme, American Chemical Society.
|
American Chemical Society, M. and C. American Chemical Society. Division of Industrial and Engineering (1967). Irradiation of polymers: a symposium at The 151st Meeting of the American Chemical Society, Pittsburgh, Pa., March 29-30, 1966. Washington, American Chemical Society.
|
American Chemical Society. and B. Kê (1964). Thermal analysis of high polymers. [Easton, Pa.], Interscience Publishers.
|
American Chemical Society. Division of Chemical Marketing and Economics. (1976). Historical notes on chemical marketing and economics; Barrier polymers; Barrier resins; Economic aspects and opportunities for chemicals in tertiary oil recovery. New York, Chemical Marketing and Economics Division, American Chemical Society.
|
American Chemical Society. Division of Industrial and Engineering, C. and M. American Chemical Society (1968). Stabilization of polymers and stabilizer processes: a symposium sponsored by the Division of Industrial and Engineering Chemistry at the 153rd meeting of the American Chemical Society. April 11-13, 1967. Washington, D.C., American Chemical Society.
|
