Ahmed, I. and A. Council for National Academic (1981). Influence of hydrolysis method on the physical properties of partly hydrolysed poly(vinyl acetate) polymers and their iodine complexes, North East London Polytechnic.
|
Ahmed, I., R. V. Parish, et al. (1991). Functionalized polysiloxane polymers for extraction of metal ions from solution. Manchester, UMIST.
|
Ahmed, M. S. (1978). Studies of isocyanate polymers. Birmingham, University of Birmingham.
|
Ahmed, S. S. (2001). Three dimensional characterisation of groundwater quality parameters around mines and landfill sites.
|
Ahmed, T. (1992). Phase transformations in Ti-Al-V alloys based on titanium aluminides Ti(3)Al and TiAl.
|
Aiaa/Asme/Asce/Ahs/Asc Structures, S. D. a. M. C. and A. American Institute of Aeronautics and (1990). A collection of technical papers: AIAA/ASME/ASCE/AHS/ASC 31st Structures, Structural Dynamics and Materials Conference, April 2-4, 1990. [S.l.], American Institute of Aeronautics and Astronautics.
|
Aiaa/Asme/Asce/Ahs/Asc Structures, S. D. a. M. C. and A. American Institute of Aeronautics and (1990). AIAA/ASME/ASCE/AHS/ASC 31st Structures, Structural Dynamics and Materials Conference: April 2-4, 1990. Washington, D.C, American Institute of Aeronautics and Astronautics.
|
Ainsworth, R. A., R. P. Skelton, et al. (1993). Behaviour of defects at high temperatures: papers presented at the International Conference held at SIRIUS, University of Sheffield, on behalf of the European Structural Integrity Society (ESIS). London, Mechanical Engineering Publications [in association with] ESIS.
|
Aird, F. (1996). Fiberglass & composite materials: an enthusiast's guide to high performance non-metallic materials for automotive racing and marine use. New York, HP Books.
|
Akartuna, S. E. (1994). Identification of phase flow rates in oil-gas-water flow from turbulent capacitance and pressure signals.
|
Akbay, T. (1993). Laser induced reaustenitisation from ferrite/cementite aggregates in steels.
|
Akelah, A. and A. Moet (1990). Functionalized polymers and their applications. London; New York, Chapman and Hall.
|
Akers David, J. and D. American Society of Civil Engineers Materials Engineering (1989). Creative application of materials engineering: Session: Papers. New York, NY, American Society of Civil Engineers.
|
Akers, D. J. and American Society of Civil Engineers. Materials Engineering Division. (1989). Creative application of materials engineering: proceedings of a session sponsored by the Materials Engineering Division of the American Society of Civil Engineers in conjunction with the ASCE Convention in New Orleans, Louisiana, October 10, 1989. New York, N.Y., American Society of Civil Engineers.
|
Akhter, R. (1990). Laser welding of zinc coated steel.
|
Akil, H. (2002). The impact response of composite sandwich structures. Liverpool, Thesis Ph.D.
|
Akmal, N., A. M. Usmani, et al. (1998). Polymers in sensors: theory and practice. Washington, DC, American Chemical Society: Distributed by Oxford University Press.
|
Akoval*, G. (2005). Polymers in construction. Shawbury, Shrewsbury, Shropshire, Rapra Technology.
|
Akser, E. O. (2001). Processing and characteristics of bilayer TiC/C coating on sic monofilament.
|
Akutagawa, K. (1995). The effect of incorporation of low molar mass liquids on the dynamic mechanical properties of elastomers under strain.
|
Al Wardy, W. M. H. (2003). Analytical and experimental study of the poroelastic behaviour of clean and clay-rich sandstones: 225 leaves.
|
Al Yaarubi, A. H. B. A. (2003). Numerical and experimental study of fluid flow in a rough-walled rock fracture: 169 leaves.
|
Al-Abdul-Rasoul, F. A.-M. (1979). Photochemistry and photophysics of carbazole-containing monomers and polymers.
|
Al-Ammar Khalid Hassan, B. (1991). Electro-optic phenomena in side-chain liquid crystal polymers, University of Reading.
|
Al-Azzawi, S. (2002). Variations of the elastic modulus of human enamel: 282 leaves.
|
Albertsson, A.-C. (2002). Degradable aliphatic polyesters. Berlin; New York, Springer.
|
Albertsson, A.-C. and P. International Scientific Workshop on Biodegradable Plastics and (1999). 5th International Scientific Workshop on Biodegradable Plastics and Polymers: degradability renewability and recycling - key functions for future materials: under the auspices of European Polymer Federation held in Stockholm, Sweden June 9-13, 1998. Weinheim, Wiley-VCH.
|
Albertsson, A.-C. and S. J. Huang (1995). Degradable polymers, recycling, and plastics waste management. New York, M. Dekker.
|
Albertsson, A.-C., Ed. (1999). 5th International scientific workshop on biodegradable plastics and polymers: degradability, renewability and recycling: key functions for future materials, Wiley-VCH Verlag.
|
Albertsson, A.-C., S. J. Huang, et al. (1995). Degradable polymers, recycling, and plastics waste management. New York, N.Y., M. Dekker.
|
Albertsson, A.-C., S. Karlsson, et al. (1998). Invited and contributing lectures presented at the International Symposium on Molecular Architecture for Degradable Polymers: Molecular Design of Polymeric Materials of Tomorrow: held in Stockholm, Sweden, June 10-13, 1997. Zug, Huthig & Wepf.
|
Albertsson, A.-C., S. Karlsson, et al., Eds. (1998). International symposium on molecular architecture for degradable polymers: molecular design of polymeric materials of tomorrow, Huthig & Wepf Verlag.
|
Alcácer, L. and D. a. S. G. U.S. Army Research (1987). Conducting polymers: special applications: proceedings of the Workshop held at Sintra, Portugal. 1986. Dordrecht, Reidel.
|
Alcácer, L. and D. a. S. G. Us Army Research, Eds. (1987). Conducting polymers: special applications: Workshop: Papers, Reidel.
|
Alcácer, L. and U.S. Army Research Development and Standardization Group. (1987). Conducting polymers; special applications: proceedings of the workshop held at Sintra, Portugal, July 28-31, 1986. Dordrecht; Boston
|
Alcock, B. (2004). Single polymer composites based on polypropylene: processing and properties: 291 leaves.
|
Aldissi, M. (1989). Inherently conducting polymers: processing, fabrication, applications, limitations. Park Ridge, N.J., U.S.A., Noyes Data Corp.
|
Aldissi, M. and N. A. R. W. o. A. o. I. C. Polymers (1993). Intrinsically conducting polymers: an emerging technology. Dordrecht; London, Kluwer Academic.
|
Aldissi, M. and North Atlantic Treaty Organization. Scientific Affairs Division. (1993). Intrinsically conducting polymers: an emerging technology. Dordrecht; Boston, Kluwer Academic.
|
Aldissi, M., A. N. L. Los, et al., Eds. (1988). ICSM '88: International conference on science and technology of synthetic metals: Papers, Elsevier Sequoia.
|
